Tyco Electronics 1901820-1 Instruction Sheet

Table of Contents

Download this manual

2007 Tyco Electronics Corporation, Harrisburg, PA

All International Rights Reserved

TE logo and Tyco Electronics are trademarks.

*Trademark. Other products, logos, and company names used are the property of their respective owners.

Hydraulic Crimping Head 1901820-1

MPORTANT SAFETY INFORMATION

TOOLING ASSISTANCE CENTER 1-800-722-1111

PRODUCT INFORMATION 1-800-522-6752

Instruction Sheet

408-10111

30 OCT 07

This controlled document is subject to change.

For latest revision and Regional Customer Service,

www.tycoelectronics.com

visit our website at

Rev B

of 4

LOC B

Table of Contents

Need help?

Do you have a question about the 1901820-1 and is the answer not in the manual?

Page 1 For latest revision and Regional Customer Service, All International Rights Reserved www.tycoelectronics.com visit our website at TE logo and Tyco Electronics are trademarks. LOC B *Trademark. Other products, logos, and company names used are the property of their respective owners.
Page 2 408-10111 Hydraulic Crimping Head 1901820-1 2. DESCRIPTION (Figure 1) Upper Die Main components of Hydraulic Crimping Head Release C"-Head 1901820–1 include a “C”–head, which houses the Button stationary die, the upper and lower die release buttons which release the dies, a cylinder which Die Retaining contains the head’s hydraulic chamber, a piston (ram)
Page 3 408-10111 Hydraulic Crimping Head 1901820-1 CAUTION Additionally, inspect and service the head (as Operating the head WITHOUT the crimping dies described in Figure 3) every month or 1,000 cycles, installed will damage the C"-Head or ram. whichever comes first. Refer to Figure 1.
Page 4 408-10111 Hydraulic Crimping Head 1901820-1 ITEM TO BE INSPECTION/PROBLEM POSSIBLE SOLUTION INSPECTED Inspect for cracks, gouges, nicks, or galling on the Return tool for repair (see Section 6, C"-Head or where the C"-Head contacts dies. RETURN/REPAIR). Check to see if the upper die retaining pin does not Return tool for repair (see Section 6, C"-Head...