Target Wiley TGZLCB2DWH Assembly Instructions Manual page 14

step 8: attach right side panel
(H1) x 10 (H2) x 8
wooden dowel cam bolt
8.1. Carefully tap small wooden dowels into place. Leave 1/2" of the dowels sticking out. Carefully tap small wooden dowels into place. Leave 1/2" of the dowels sticking out.
8.2. Screw-In cam bolts must be screwed down flush. Screw-In cam bolts must be screwed down flush.
8.3. Refer to page 6 for instructions on how to use the cam lock system. Refer to page 6 for instructions on how to use the cam lock system.
8.4. Do not over tighten bolts.
14
(H3) x 8 (H3) x 8
cam cam