Nakanishi E800Z Operation Manual page 22

Fig.27 Horizontal Mounting Brackets
When the following optional parts are used, refer to operation manual.
Power Cord Retention Bracket
Model AC-STP2 Cord No.8408
(For 200v
・
21
Fig.29 Suspended Mounting Brackets
115v 230v)
・
AC Power Plug
Model AC-SO3 Code. No.8414 (ASE8414 in U.S.A.)
※This is the plug only to connect to the control unit
Caution-do not attempt to make any electrical connections without
Control Panel Extension Cord (Assembly : 4m (13ft.) )
Model PEX-4 Code No.8411 (ASE8411 in U.S.A.)
This plug does not include a power cord. It is intended to be used with
a standard 3 conductor cable. The cable Iength can be cut to fit your
specific installation. Please refer to the Minimum gage for cord chart
on page 1 of this manual to determine the proper cord gage for the
length and voltage required.
consulting with a qualified electrician.
Fig.28 Vertical Mounting Brackets
,
s Main Power Inlet.