17．Optional Parts - Nakanishi E800Z Operation Manual

17
Optional Parts
There are several optional parts available depending on how you need to configure or mount the
control unit. Please order by Catalog Number.
（1）Bracket
Horizontal Mounting Brackets (4pcs./set)
Model BRB-4 Code No.8410 (ASE8410 in U.S.A.)
Suspended Mounting Brackets(4pcs./set)
Model BRC-4 Code No.8413(ASE8413 in U.S.A.)
（２）Mounting Brackets
・3 Mounting Bracket styles are available.
Horizontal Mounting Brackets
Vertical Mounting Brackets
Suspended Mounting Brackets
！
CAUTION
Make sure to use the complete bracket set. A bracket is required to support all areas of the
control unit. Do not substitute screws, use the screws you remove from the unit in the
same place as they were removed from.
！
CAUTION
Never install the unit in an inclined or inverted position. This manner of installation will
cause heat buildup, or damage to the control unit.
Never install the unit in such a manner as to block the air vents on the side of the control
unit. This manner of installation will cause heat buildup and damage to the internal
components of the control unit.
(Fig.27)
(Fig.28)
(Fig.29)
Vertical Mounting Brackets (2 pcs./set)
Model BRR-2 Code No.8412(ASE8412 in U.S.A.)
20