Changing Basic Settings - Bosch SM Series User Manual

Basic setting
timeLight
InfoLight
Tone volume
1
Factory setting (may vary according to model)

Changing basic settings

Open the appliance door.
1.
Press ⁠ .
2.
Hold programme button A and press
3.
repeatedly until the display
shows H:xx.
Release programme button A and
4.
⁠ .
a Programme button A flashes and the
display shows H:04.
Press programme button A re-
5.
peatedly until the display shows the
required setting.
Display text Selection
1
S:01 S:00 - S:02
1
I:01 I:00 - I:01
1
b:02 b:00 - b:03
Description
Switch timeLight on or off.
While the programme is running,
status information is projected onto
the floor below the appliance door re-
lating to timer programming, the pro-
gramme or the time now remaining. If
the base panel is pulled forwards or if
the appliance is installed at eye level
with the cabinet front fitted flush, the
display is not visible.
The setting "S:00" switches timelight
off.
Switch InfoLight on or off.
While the programme is running, a
spot of light is projected onto the floor
below the appliance door. This light
will not be visible if the appliance is in-
stalled at eye level with the cabinet
front fitted flush. If the appliance door
is not completely closed, the spot of
light will flash. The programme has
ended when the spot of light is no
longer visible on the floor.
The setting "I:00" switches Infolightoff.
Adjustment of tone volume.
End of programme indicated by an
audible signal tone.
The setting "b:00" switches the signal
tone off.
Press programme button C re-
6.
peatedly until the display shows the
right value.
You can change several settings.
Press to save the setting.
7.
Close the appliance door.
8.
Basic settings en
39