Washing Results - Bosch SM Series User Manual

Errors
Another error code appears
on the display.
E:01 to E:30

Washing results

Errors
Tableware is not dry.
Cause
A technical fault is present.
Cause
No rinse aid used or dosage
set too low.
Selected programme has no
drying phase
Water collects in recesses of
the tableware or cutlery.
The combined detergent used
has a poor drying perform-
ance.
Extra Dry not activated to im-
prove drying performance.
Troubleshooting en
Troubleshooting
Press .
1.
Unplug the appliance or switch off the
2.
fuse.
Wait at least 2 minutes.
3.
Insert the mains plug of the appliance
4.
in a socket or switch on the fuse.
Switch the appliance on.
5.
If the problem occurs again:
6.
Press ⁠ .
‒
Turn off the water tap.
‒
Pull out the mains plug.
‒
Contact Customer Service
‒
→ Page 55 and give the er-
ror code.
Troubleshooting
Add Rinse aid → Page 30.
1.
Set the amount of rinse aid to be dis-
2.
pensed.
Select a programme with drying.
▶
Position tableware at an angle where
▶
possible.
Use rinse aid to improve drying per-
1.
formance.
Use a different combined detergent
2.
with a better drying performance.
Activate Extra Dry.
▶
45