Safety instructions Delivery The electrical connection conditions must correspond 1. Check the packaging and with the specifications dishwasher immediately for on the dishwasher rating plate 92. damage caused in transit. Do not switch on a damaged If the power cord of this appliance, but contact your appliance is damaged, supplier.
Safety instructions Some models: Disposal The plastic housing on the 1. Make redundant appliances water connection contains unusable to prevent an electric valve, subsequent accidents. the connecting cables 2. Dispose of the appliance in a are in the supply hose. n environmentally friendly Do not cut through this hose, manner.
Safety instructions ã= Keep children away from Warning open dishwasher. Risk of explosion! The water in the rinsing Do not add any solvents compartment is not drinking to the washing chamber. water and could contain Danger of explosion! detergent residue. Ensure that children do not ã= Warning...
Water softening system/Special salt Overview of menu 1. Find out about the hardness value of your tap water. Your water utility company will help you with this. The settings can be found in the 2. Set value can be found in the water individual chapters.
Water softening system/Special salt Using special salt Using detergents with salt component D e t e r g e n t s wi t h s a l t co m p o n e n t Always refill with special salt immediately before switching on the If combined detergents with a salt appliance.
Rinse aid 4. To prevent excessive foam formation Rinse aid during the next rinse cycle, remove any rinse aid which has run over with a i d R i n s e a cloth. As soon as the rinse-aid refill indicator P is lit on the fascia, there is still a rinse-aid reserve of 1-2 rinsing Setting amount of rinse aid...
Utensils Switching off rinse aid refill Glass and utensil damage indicator Causes: If the rinse-aid refill indicator P is Glass type and glass production impaired (e.g. when using combined process. detergents containing rinse aid Chemical composition of the component), it can be switched off. detergent.
Utensils Unloading the dishwasher Pans Bottom basket 1b To prevent water from dripping off the upper basket onto the utensils in the lower basket, it is recommended to empty the appliance from the bottom Hot utensils are sensitive to shock! Therefore, when the programme ends, leave the utensils to cool down in the dishwasher until they can be handled.
Utensils Cutlery drawer F olding spikes * Fo l d i n g s p i k e s Arrange the cutlery in the cutlery drawer * depending on model 1* as illustrated. Separately arranged The spikes can be folded down to utensils are easier to remove after improve arrangement of pans, bowls washing.
Utensils 1. Pull out the top basket 12 out. Adjusting the height of the 2. To lower the basket, press in the left basket and then the right lever on the outside of the basket. In doing so, The height of the upper utensils basket hold the sides of the basket along 12 can be adjusted in 3 stages to the upper edge to prevent it from...
Detergent Adding detergent Detergent 1. If the detergent dispenser 9" is still D e t e r g e closed, press the lock 9* to open You can use tablets as well as powder or liquid detergents for dishwashers, but the detergent dispenser.
Detergent Notes If the utensils are only lightly soiled, You will obtain optimum rinsing slightly less than the indicated amount and drying results by using solo of detergent is usually adequate. detergents and applying salt and rinse aid separately. Suitable detergents and care products If programmes are short, tablets can be purchased online may not have full cleaning effect...
Overview of programmes Overview of programmes p r o g r a m m e s O v e r v i e w o f The max. possible number of programmes is illustrated in this overview. The corresponding programmes and their arrangement can be found on the fascia.
Additional options § Information for test institutes Half load * Ha l f l o a d Test institutes receive the information for If you have only a few items to wash comparability tests (e.g. according to (e.g. glasses, cups, plates), you can EN60436).
Operating the appliance Optical display while Remaining running time Op t i c a l d i s p l a y wh i l e t h e p r o g r a m m e i s r u n n i n g the programme is running * display * depending on model...
Operating the appliance End of programme Automatic switch off after end of programme or interior light* Au t o m a t i c s w i t c h of f / i n t e r i o r l i g h t The programme has ended when the value : is indicated on the numerical...
Operating the appliance Interrupting the programme To change the setting: 1. Press programme button 3. 1. Open the door. Each time the button is pressed, 2. Switch off ON/OFF switch (. the set value increases by one level; when the value of : has been The LEDs go out.
Cleaning and maintenance Never use a steam cleaner to clean your Cleaning and dishwasher. The manufacturer is not liable for any consequential damage. maintenance Regularly wipe the front of the appliance e n a n c e a n d m a i n t C l e a n i n g and fascia with a damp cloth;...
Cleaning and maintenance Filters Spray arms The filters 1Z keep large foreign Limescale and contaminants in the objects in the rinsing water away from rinsing water may block nozzles and bearings on the spray arms 1: and the pump. These foreign objects may occasionally block the filters.
Fault, what to do? Fault table Fault Cause Remedial action “Check water supply” Supply hose kinked. Install supply hose without kinks. display @ lights up. Tap turned off. Turn on the tap. Tap jammed or calcified. Turn on the tap. Flow rate must be min.
Fault, what to do? Fault Cause Remedial action A different error code is A technical fault has probably Switch off appliances with the ON/OFF switch (. After a short time restart indicated on the digital occurred. display. the appliance. to : If the problem recurs, turn off the tap and pull out the mains plug.
Fault, what to do? Fault Cause Remedial action Utensils not dry. No or too little rinse aid Refill rinse aid. in the dispenser. Programme selected without Select programme with drying (see drying. Overview of programmes, Programme sequence). Water collecting in depressions Arrange utensils in a sloping position, on the utensils and cutlery.
Fault, what to do? Fault Cause Remedial action Food remnants Utensils placed too closely Arrange utensils with adequate clearance on the utensils. together, utensils basket between them ensuring that the spray jets overfilled. can reach the surface of the utensils. Prevent contact points.
Fault, what to do? Fault Cause Remedial action Water stains on plastic Droplet formation on plastic Use a more intensive programme (more parts surface is physically unavoidable. water changes). After drying, water stains are Arrange utensils in a sloping position. visible.
Fault, what to do? Fault Cause Remedial action Coloured (blue, yellow, Film formation consisting Can be partly removed with machine brown), difficult to remove of ingredients from vegetables cleaner or by mechanical cleaning. Coatings to non-removable coatings (e.g. cabbage, celery, potatoes, are harmless.
Fault, what to do? Fault Cause Remedial action Rust spots on the cutlery. Cutlery not adequately rust- Use corrosion-resistant cutlery. resistant. Knife blades are frequently more severely affected. Cutlery will also rust if rusting Do not wash rusting parts. parts are rinsed at the same time (pan handles, damaged utensil baskets, etc.).
Customer service Fault Cause Remedial action Appliance stops Door not closed properly. Close the door. in the programme or Do not place utensils or fragrance Check whether rear panel is being pressed programme is interrupted. dispenser in the tablet collecting in, e.g.
Installation and connection Safety instructions Installation and connection Please follow the safety instructions under “Installation”. i o n a n d c o n n e c t l a t i o n I n s t a l The dishwasher must be connected correctly, otherwise it will not function Delivery...
Installation and connection Installation Fresh water connection The required installation dimensions can 1. Connect the fresh-water connection be found in the installation instructions. to the tap according to the Level the appliance with the aid of the installation instructions with the height-adjustable feet.
Installation and connection Setting hot water: The connection may be modified by technicians only. 1. Open the door. A power cord extension may be 2. Switch on ON/OFF switch (. purchased from customer service 3. Hold down programme button # only.
Installation and connection Transportation Protection against frost Pr o t e c t i o n a g a i n s t fr o s t ( E m p t y i n g t h e a p p l i a n c e ) Empty the dishwasher and secure loose If the appliance is in a room where there parts.