Clean Wastewater Pump; Transportation, Storage And Disposal; Removing The Appliance; Protect Appliance From Frost - Bosch SM Series User Manual

en Transportation, storage and disposal

Clean wastewater pump

Large remnants of food or foreign bod-
ies can block the wastewater pump. As
soon as the washing water no longer
drains properly, the wastewater pump
must be cleaned.
WARNING
Risk of injury!
Sharp and pointed objects or frag-
ments of glass may block the waste
water pump and cause injury.
Remove any foreign bodies carefully.
▶
Disconnect the appliance from the
1.
power supply.
Remove the top and bottom basket.
2.
Remove the filter system.
3.
Scoop out any water.
4.
Use a sponge if necessary.
Prise off the pump cover using a
5.
spoon and grip it by the crosspiece.
Lift the pump cover inwards at an
6.
angle and remove.
Remove any remnants of food and
7.
foreign bodies in the area of the im-
peller.
Insert the pump cover
8.
down ⁠ .
54
a The pump cover clicks into position.
9.
10.
Transportation, storage
and disposal
You can find out here how to prepare
your appliance for transportation and
storage. You will also find out how to
dispose of old appliances.

Removing the appliance

1.
2.
3.
4.
5.
6.
7.

Protect appliance from frost

and press
If there is a risk of frost where the appli-
ance will be standing, e.g. in a holiday
home, empty the appliance completely.
▶
1
Install the filter system.
Insert the top and bottom basket.
Disconnect the appliance from the
power supply.
Turn off the water tap.
Detach the drainage connection.
Detach the drinking water connec-
tion.
Loosen any screws fastening the ap-
pliance to cabinet parts.
Remove the base panel if fitted.
Pull the appliance out carefully,
along with the hose behind it.
Empty the appliance. → Page 55
2