Install Interior Assembly - Kwikset 264 Installation And User Manual

5

Install interior assembly

A
Remove the battery cover.
J
D
Align the colored edges of the connectors
and ensure a tight cable connection.
G
Test the turnpiece for smooth rotation.
If turnpiece
doesn't rotate,
repeat steps 5E
and 5F, making
sure to rotate
the turnpiece
AWAY from the
door edge.
Kwikset: 1-800-327-5625 • www.kwikset.com
B
Load 4 AA batteries into the interior assembly. For best
results, use new, non-rechargeable Alkaline batteries only.
H
Note: Turnpiece
may move
on its own.
E
IMPORTANT: Rotate the turnpiece
AWAY from the door edge.
45°
H
Secure the interior assembly with the
supplied screws.
L (3x)
6 / 10
C
Press and hold the Reset button on the interior
assembly for 5 seconds, until you hear 3 beeps.
Ensure correct
polarity.
F
Make sure the torque blade is still in the horizontal
position and install the interior assembly.
door
edge
I
Reinstall battery cover and make sure the latch is still in
the unlocked position.
horizontal
J
unlocked
© 2016 Spectrum Brands, Inc.