Install The Exterior Assembly - Kwikset 264 Installation And User Manual

4

Install the exterior assembly

A
Install the cylinder into the exterior
assembly.
D
IMPORTANT: Make sure the torque
blade is in the horizontal position.
horizontal
G
Secure the mounting plate with the
supplied screws.
Keep
parallel to
door edge.
M (2x)
Kwikset: 1-800-327-5625 • www.kwikset.com
B
Route the cable below the latch.
D
E
E
Insert the torque blade through the
horizontal slot of the cross-shaped hole.
horizontal
slot
H
Insert the key and test the latch for
smooth operation.
exterior side
of door
cable
If latch does
not operate
smoothly,
adjust screws.
5 / 10
C
IMPORTANT: Make sure the latch is fully
retracted (in the unlocked position).
unlocked
F
Push the torque blade through the center
hole in the mounting plate and send the
cable through the bottom hole.
interior side of door
torque blade in
center hole
cable in
bottom hole
I
Remove the key and make sure the latch
bolt is still in the unlocked position.
F
G
unlocked
© 2016 Spectrum Brands, Inc.