Makita DUR361U Instruction Manual page 11

Remaining battery capacity indication
2
014808
Press the check button to make the battery indicators
show the remaining battery capacities. The battery
indicators correspond to each battery.
Remaining battery capacity indication
Battery indicators
(Battery 1 or Battery 2)
On Off
or
014809
1. Battery
indicators
2. Check button
1
Remaining
capacity
Blinking
50% to 100%
20% to 50%
0% to 20%
Charge
the battery
Abnormal indications during use
Battery indicator
On
Battery 1 Battery 2
014811
The indicators show various states using the remaining
battery capacity indication.
Power switch action
WARNING:
Before inserting the battery cartridge into the tool,
•
always check to see that the switch trigger
actuates properly and returns to the "OFF"
position when released. Do not pull the switch
trigger hard without turning the lock-off lever. This
can cause switch breakage. Operating a tool with a
switch that does not actuate properly can lead to loss
of control and serious personal injury.
1
2
014812
Push the power button on the housing so that the tool is
powered on and power indicator lights.
11
Off
Status
The tool may have
malfunctioned.
The tool may have
malfunctioned.
The protective function for
battery with star marking
operated (overheat).
Few remaining capacity,
charge the battery.
The tool detected an
abnormally high voltage.
Replace battery cartridge.
1. Power indicator
2. Power button