Safety Measures - Vitek VT-2437 Manual Instruction

ENGLISH
GARMENT STEAMER VT-2437
The unit is intended for quick and careful smooth-
ing of folds on clothes or furniture.
DESCRIPTION
Sprayer
1.
Sprayer holder
2.
Bracket for additional hanger
3.
Hanger
4.
Telescopic stand latches
5.
Steam hose
6.
Steam hose protection
7.
Telescopic stand latch
8.
Water tank
9.
Operation mode switch
10.
ON-indicator
11.
Body
12.
Water tank lid
13.
Water drain stopper
14.
Nozzle brush
15.
ATTENTION!
For additional protection it is reasonable to install
a residual current device (RCD) with nominal
operation current not exceeding 30 mA. To install
RCD, contact a specialist.

SAFETY MEASURES

Read this instruction manual carefully before using
the unit and keep it for the whole operation period.
Use the garment steamer for intended purposes
only, as specified in this instruction manual.
Mishandling the unit may lead to its breakage
and cause harm to the user or damage to his/
her property.
•
Before using the unit for the first time, make
sure that the voltage in your mains corre-
sponds to unit operating voltage.
•
The power cord is equipped with a "europlug";
plug it into the socket with a reliable ground-
ing contact.
•
To avoid fire, do not use adapters for connect-
ing the unit to the mains.
•
Do not use the unit outdoors.
•
Place the unit on a flat steady moisture-resis-
tant surface.
•
Before using the unit, examine the unit body,
the power cord and the steam hose closely
and make sure that they are not damaged.
Do not use the unit if the unit body, the power
cord or the steam hose are damaged.
•
Avoid contact of the power cord or the steam
hose with hot surfaces and sharp furniture
IM VT-2437.indd 4
edges. Avoid damaging the isolation of the
power cord and the steam hose.
•
Use the supplied removable parts only.
•
Do not operate the unit without water; discon-
nect the unit from the power supply when the
water tank becomes empty.
•
Do not move or tilt the unit during its opera-
tion.
•
Do not use sparkling water, any perfume addi-
tives or starch solutions.
•
Always unplug the unit before cleaning, main-
tenance works, when filling the water tank
with water or draining water from it or if you do
not use the unit.
•
Install or remove the nozzle brush only after
the unit has cooled down completely.
•
Do not cover the sprayer openings and avoid
foreign objects getting inside them.
•
The telescopic stand should be completely
extended and fixed during the garment
steamer operation to prevent bending of the
steam hose and to provide free steam release.
•
To avoid damaging the unit, do not use the
steam hose to move the unit.
•
During the unit operation the steam hose sur-
face can heat up, be careful to avoid burns.
•
Do not immerse the unit body, the power plug
or the power cord into water or other liquids.
•
Do not touch the power plug with wet hands.
•
Do not leave the operating unit unattended.
•
Use the garment steamer for its intended pur-
pose only. Do not direct the sprayer at furni-
ture, electrical appliances, books and objects
that can be damaged by hot steam.
•
Do not steam clothes on a person as the tem-
perature of the released steam is high, use a
clothes hanger or a coat rack.
•
Never pull the power cord when disconnect-
ing the unit from the mains; take the power
plug and carefully pull it out of the mains
socket.
•
Clean the unit regularly.
•
Do not allow children to use the unit as a toy
and do not allow them to touch the unit body
and the power cord during the steamer oper-
ation.
•
The unit is not intended for usage by persons
(including children) with physical or mental
disabilities or by persons lacking experience
or knowledge if they are not under supervision
of a person who is responsible for their safety
or if they are not instructed by this person on
the usage of the unit.
4
13.11.2018 16:31:05