Table of Contents
Advertisement
3.5
Installation of Safety Discharges
The opening temperature of the P & T valve is 90°C.
The position of the tundish should be visible to the occupants and must be positioned
away from any electrical devices. Refer to the drawing below for typical tundish position,
discharge pipe and connection details. The relief valve connections should not be altered
or used for any other type of connection.
The incoming cold water supply pipe must be fitted with a stopcock / isolation valves (and
in line with current water bylaws) before the cold water enters the ModuSat, as the
unvented kit is contained within the HIU itself. A drain cock is fitted inside the ModuSat.
Note: For further information about the hydraulic arrangement please refer to pages 5-7 in
this manual.
25
Hide quick links:
Advertisement
Table of Contents
