Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Skyrc D200neo
Summary of Contents for Skyrc D200neo
- Page 1 v. 45 Instruction Manual AC/DC Multi-Function Smart Charger SK-100196 - 1 -...
-
Page 2: Table Of Contents
Contents Introduction Warning Getting to know D200neo Specifications Standard Battery Parameters Power and Battery Connection Program Flow Chart Battery Operations Matrix Lithium Battery Program (LiPo/LiFe/Lilon/LiHV) Parallel Charge (LiPo/LiFe/Lilon/LiHV) NiMH/NiCd Battery Program Pb Lead-Acid Battery Program External Discharge Working with Charger Master... -
Page 3: Introduction
SkyRC D200neo AC/DC Multi-Function Smart Charger! D200neo features independent dual ports and supports most batteries used in the RC industry. As a dual- input charger, it is versatile enough for various charging scenarios. In addition to inheriting the well-crafted interface and powerful functions of the T1000, we’ve added SkyCharger App control, Charger Master control... -
Page 4: Getting To Know D200Neo
Getting to know D200neo Interface： Ports: LCD Display XT60 Output Balance Port Port Button Switch between Ports A and B; USB-C PD/QC3.0 Output Port Short-press to exit System Settings; DC Input Scroll Button Short-press to enter the menu or confirm a setting;... -
Page 5: Specifications
Specifications Model D200neo Max. 2.5A @ 100V Max. 1.2A @ 220V Input Voltage Max. 35A (Max. 17.5A per single channel) Input Current 30.0-35.0A Max. 200W (±10%) Charge Power Max. 800W (400W X 2) Main port 10W(±20%) Discharge Power Balance port Max. -
Page 6: Standard Battery Parameters
Specifications Voltage 5-27V (±0.5V) DC Power Supply Current 1-15A (±10%) QC3.0 5V 3A, 9V 2A, 12V 1.5A 18W USB Type-C Output 5V 3A, 9V 2.2A, 12V 1.67A 20W Temperature 0°C/32°F ~ 40°C/104°F Working Environment Humidity 5%~75% Temperature -10°C/14°F ~ 70°C/158°F Stortage Environment Humidit... -
Page 7: Power And Battery Connection
Power and Battery Connection 1. Connecting to Power Source D200neo supports AC and DC dual input. The input voltages are: DC: 10-30V Connect to a compatible DC power source. DC IN 10-30V 100-240~ AC: 100-240V Connect to a compatible AC power source. -
Page 8: Program Flow Chart
Program Flow Chart CH B CHARGE SETTING Start LiPo / 6S / Balance CHG LiPo / 6S / Discharge Battery Type LiPo 4.20V 4.04V Battery Cell 6S(22.2V) 25.15 24.30 4.20V 4.04V Task Balance CHG 7.91 0.41 4.20V 4.04V Condition 4.2V 4.20V 4.04V Cycle... - Page 9 Program Flow Chart Updating Wizard Updating Wizard Updating Wizard #C969 FW:1.37 BOOT:1.09 #C969 FW:1.37 BOOT:1.09 #C969 FW:1.37 BOOT:1.09 Waiting... Your firmware Data Received: 0 Kbyte is the latest version Checking... WARNING: DO NOT power off or quit the program! V1.37 Upgrading process takes around 5 mins.
-
Page 10: Battery Operations Matrix
Battery Operations Matrix Type Working Mode Description This mode is to balances charge the lithium battery according to the user-defined Balance CHG charging rate. It ensures each cell of the battery is balanced. LiPo Charge This mode charges the lithium battery based on the selected charging rate. Lilon This mode stores the battery via charging or discharging its voltage to a specific Storage... -
Page 11: Lithium Battery Program (Lipo/Life/Lilon/Lihv)
Lithium Battery Program (LiPo/LiFe/Lilon/LiHV) Scan or Click to Watch CH A CHARGE SETTING CH A CHARGE SETTING CH A CHARGE SETTING CH A CHARGE SETTING Battery Type Battery Type Battery Type LiPo LiPo LiPo Battery Type LiPo Battery Cell 6S(22.2V) Battery Cell 3S(11.1V) Battery Cell... -
Page 12: Parallel Charge (Lipo/Life/Lilon/Lihv)
Parallel Charge (LiPo/LiFe/Lilon/LiHV) • Parallel Mode is available only for lithium batteries and cannot be used with other battery types. • To avoid short circuits, always connect the charge leads to the charger first, then to the battery. When disconnecting, reverse the sequence. 1. -
Page 13: Nimh/Nicd Battery Program
NiMH/NiCd Battery Program Scan or Click to Watch CH A CHARGE SETTING CH A CHARGE SETTING CH A CHARGE SETTING CH A CHARGE SETTING Battery Type NiMH Battery Type NiMH Battery Type NiMH Battery Type NiMH Lilo Battery Cell 6S(7.2V) Battery Cell 6S(7.2V) Battery Cell... -
Page 14: Pb Lead-Acid Battery Program
Pb Lead-Acid Battery Program Scan or Click to Watch CH A CHARGE SETTING CH A CHARGE SETTING CH A CHARGE SETTING CH A CHARGE SETTING Battery Type Battery Type NiMH Battery Type NiMH Battery Type NiMH Lilo Battery Cell 6S(12.0V) Battery Cell 6S(12.0V) Battery Cell... -
Page 15: External Discharge
External Discharge D200neo supports external discharge, reaching up to 40A when connected to the BD350 discharger. 1. Once the power supply is connected, D200neo powers up and enters the main interface automatically; Scan or Click to Watch 2. Connect the BD350 discharger to D200neo;... -
Page 16: Working With Charger Master
2. Power on your D200neo. 3. Connect the D200neo to your computer using a USB Type-C cable. (It is recommended to select the "Data" function under the USB menu in System Settings before connecting to the PC. -
Page 17: Battery Performance Analyzer
Battery Performance Analyzer When connected to the BD350 discharger, D200neo can analyze battery performance, helping users select more suitable batteries for RC competitions and improve their results. 1. Launch Charger Master and select Battery Analyzer from the top left. 2. Specify the battery type, discharge current, cut-off voltage, and other parameters. -
Page 18: App Control With Skycharger
App Control with SkyCharger This charger comes equipped with a built-in Bluetooth 5.0 module, enabling users to easily control the charger and analyze battery performance via the SkyCharger app. Whether you're racing outdoors or at home, you can conveniently test and monitor battery performance curves anytime, anywhere. Scan the QR code below to download the SkyCharger app. -
Page 19: Dc Power
DC Power 1. On the main interface, hold the Scroll Button for five seconds to enter System Settings. 2. Select DC Power and adjust the output voltage and current. 3. Press the Scroll Button to activate the power function after setting. Scan or Click to Watch 4. -
Page 20: Pd/Qc3.0 Output
PD/QC3.0 Output In addition to charging RC batteries, the charger can also charge mobile devices through the USB Type-C PD/QC3.0 output with a charging power of up to 20W. QC3.0 20W - 20 -... -
Page 21: Bumpgo With Nfc Enabled
BumpGo with NFC Enabled BumpGo is a technology developed by SkyRC that integrates NFC tags to revolutionize the charging process. How to Use the BumpGo Tag on Batteries with D200neo+? Scan or Click to Watch BumpGo is a technology developed by SkyRC that integrates NFC tags to revolutionize the charging process. - Page 22 How to Charge with the BumpGo tag? Scan or Click to Watch Step 1: Tap the BumpGo tag on the battery onto the sensing area of the D200neo+. Ensure the tag is in good contact with the charger’s sensing area. Battery Type LiPo Battery Cell 6S(22.5V)
-
Page 23: Firmware Upgrade
4. Wait for the progress bar to reach 100%. The process will take approximately 5 minutes. Method 2 1. Connect D200neo to your computer using a USB Type-C cable. 2. Launch Charger Master on your computer. 3. Once the status shows CONNECTED, click to check for new firmware. -
Page 24: Errors Explained
Errors Explained In the event of a fault, D200neo will display an error message indicating issues such as connection problems or battery mismatches. Refer to the table below for troubleshooting solutions based on the error code. Error Message Explanation DC Input Low! -
Page 25: Charge Settings
Charge Settings On the main interface, press the Scroll Button to enter Charge Settings, where you can switch between Ports A and B by pressing the Port button. Menu Definition Battery Type Select your desired battery type. (LiPO, LiIon, LiFe, LiHV, Pb, NiMH, NiCd) Select the number of battery cells corresponding to the battery type. -
Page 26: System Settings
System Settings On the main interface, hold the Start button for five seconds to enter System Settings. Menu Option Definition Safety Timer Customize a period for program protection. Max.Capacity Customize the protection of capacity. Task Parameters Trickle Charge Enable/disable trickle charge. Back Back to the previous interface. - Page 27 A/B) Back Back to the previous interface. Power for Tire Activate to power SkyRC Tire Warmer on port A Warmer- A Power for PD Activate to power SkyRC PD Hub on Port B Hub - B Measure the battery voltage and internal Battery Meter resistance.
-
Page 28: In The Box
In The Box 1* SkyRC D200neo Charger 1* AC Power Cord 1* Quick Start Guide Optional Parts XT60 XT60 XT60 BD350 Discharger BD380 Discharger Parallel Charging Cable (SK-600147-01) (SK-600153-01) (SK-600023-19) Pro Parallel Charging Cable PCH-150 Charging Hub (SK-600023-20) (SK-600148-01) - 28 -... -
Page 29: Conformity Declaration
Conformity Declaration D200neo satisfies all relevant and mandatory CE directives and FCC Part 15 Subpart B. Test Title Result Standards EN 60335-1 Household and similar electrical appliances - Safety - Part 1: General requirements. Conform Household and similar electrical appliances – Safety – Part 2-29: Particular requirements for... -
Page 30: Warranty And Service
This charger is designed and approved exclusively for use with the types of battery stated in this Instruction Manual. SkyRC accepts no liability of any kind if the charger is used for any purpose other than that stated. We are unable to ensure that you follow the instructions supplied with the charger, and we have no control over the methods you employ for using, operating, and maintaining the device. - Page 31 - 31 -...
- Page 32 The manual is subject to change without notice; please refer to our website for the latest version! Manufactured by SKYRC TECHNOLOGY CO., LTD. www.skyrc.com 2024.10 Floors 4, 5, & 8, Building 4, Meitai Technology Park, Guanguang South Road, Guanlan, Longhua District, Shenzhen 518110, China...
Need help?
Do you have a question about the D200neo and is the answer not in the manual?
Questions and answers