Code
Name
1207
Paper System
Error
2200
Scan Carrier
Stall
POST symptom table
Symptom
Power, Copy, or
Scan lights do
not come on;
motors do not
operate.
The paper feed
gears do not
turn.
Description
A paper system control
failure was detected.
The scan carrier has
stalled.
Action
"Power service check" on page
Go to the
go to
"Control panel problems" on page
Go to the
"Paper feed service check" on page
Action
Clear the paper path.
Unplug the All-In-One;
wait a few seconds,
then plug the
All-In-One back in and
turn the power on. If
the error remains,
clean the NVRAM by
pressing the Up
Arrow button and
Menu button
simultaneously. The
Self Test menu
appears; select Clean
NVRAM. If the error
continues, replace the
system board.
Unplug the All-In-One;
wait a few seconds,
then plug the
All-In-One back in and
turn the power on. If
the error remains,
check all connections
to the scanner. If
connections are okay
and the error
continues, replace the
system board.
2-16. If okay,
2-9.
Diagnostic information
4416-XXX
2-15.
2-7