Removing Motor - Husqvarna DC 6000 Workshop Manual

11.3
1
3
5
7
9
40
MOTOR
2
4
6
8

Removing Motor

First see Removing the Front
Cover (p. 32)
High Voltage
1� Slip a 2"4 under the motor.
2� Unscrew the four screws holding
the front end of the frame.
3� Remove the loose frame�
4� Open up the electrical box on the
motor�
5� Disconnect the cables inside.
6� Unscrew the power cable and
remove it�
7� Unscrew the four screws holding
the motor�
8� Remove the two hose clamps�
9� Move the frame back and leave the
motor on the board.
Reverse steps for assembly�