Electrical Data Notes For The Hydraulic Module - Carrier AQUASNAP 30RBM Series Installation, Operation And Maintenance Instructions

5.6 - Electrical data notes for the hydraulic module

The pumps fitted to these units have motors which meet efficiency class IE2 for motors < 7.5kW and IE3 for motors > 7 .5kW.
The additional electrical data required
For the low-pressure single pump motors of 30RBM/RBP 160-520 units (option 116T)
No. Description
(2) (3)
1 Nominal efficiency at full load and nominal voltage
1 Nominal efficiency at 75% of full load and nominal voltage
1 Nominal efficiency at 50% of full load and nominal voltage
2 Efficiency level
3 Year of manufacture
4 Manufacturer's name and trademark, commercial registration
number and manufacturer's head office
5 Product's model number
6 Number of motor poles
7-1 Nominal shaft power output at full load and nominal voltage (400 V)
7-2 Maximum input power (400 V)
8 Rated input frequency
9-1 Nominal voltage
9-2 Maximum current drawn (400 V)
10 Nominal speed
11 Product disassembly, recycling or disposal at end of life
12 Operating conditions for which the motor is specifically designed
I- Altitudes above sea level
II - Ambient air temperature
IV - Maximum operating temperature
V - Potentially explosive atmospheres
(1) Required by regulation No. 640/2009 concerning the application of directive 2009/125/EC on the eco-design requirements for electric motors.
(2) Item number imposed by regulation No. 640/2009, annex I2b.
(3) Description given by regulation No. 640/2009, annex I2b.
(4) To obtain the maximum input power for a unit with hydraulic module, add the maximum unit input power from the electrical data table to the pump power input.
(5) To obtain the maximum operating current draw for a unit with hydraulic module, add the maximum unit current draw from the electrical data table to the pump current draw.
(6) Above 1000 m, a degradation of 3% for each 500 m should be taken into consideration.
For the low-pressure dual pump motors of 30RBM/RBP 160-520 units (option 116U)
No. Description
(2) (3)
1 Nominal efficiency at full load and nominal voltage
1 Nominal efficiency at 75% of full load and nominal voltage
1 Nominal efficiency at 50% of full load and nominal voltage
2 Efficiency level
3 Year of manufacture
4 Manufacturer's name and trademark, commercial registration
number and manufacturer's head office
5 Product's model number
6 Number of motor poles
7-1 Nominal shaft power output at full load and nominal voltage (400 V)
7-2 Maximum input power (400 V)
8 Rated input frequency
9-1 Nominal voltage
9-2 Maximum current drawn (400 V)
10 Nominal speed
11 Product disassembly, recycling or disposal at end of life
12 Operating conditions for which the motor is specifically designed
I- Altitudes above sea level
II - Ambient air temperature
III - Maximum operating temperature
V - Potentially explosive atmospheres
(1) Required by regulation No. 640/2009 concerning the application of directive 2009/125/EC on the eco-design requirements for electric motors.
(2) Item number imposed by regulation No. 640/2009, annex I2b.
(3) Description given by regulation No. 640/2009, annex I2b.
(4) To obtain the maximum input power for a unit with hydraulic module, add the maximum unit input power from the electrical data table to the pump power input.
(5) To obtain the maximum operating current draw for a unit with hydraulic module, add the maximum unit current draw from the electrical data table to the pump current draw.
(6) Above 1000 m, a degradation of 3% for each 500 m should be taken into consideration.
is as follows:
(1)
(4)
(5)
(4)
(5)
Units
160 180 200
% 85,7 85,7 85,7
% 86,9 86,9 86,9
% 86,4 86,4 86,4
-
- This information varies depending on the manufacturer and model at the time of
incorporation. Please refer to the motor nameplates.
-
-
- 2 2 2
kW 2,2 2,2 2,2
kW 2,80 2,80 2,80
Hz 50 50 50
V 3 X 400
A 4,92 4,92 4,92
rps - rpm 48 - 2900
- Disassembly using standard tools. Disposal and recycling using an appropriate
m
°C
°C Please refer to the operating conditions given in this manual or
in the specific conditions given in the Carrier selection programs.
-
Units
160 180 200 220
% 84,9 84,9 85,7 85,7
% 86,4 86,4 86,9 86,9
% 85,9 85,9 86,4 86,4
-
- This information varies depending on the manufacturer and model at the time of
incorporation. Please refer to the motor nameplates.
-
-
- 2 2 2
kW 1,5 1,5 2,2
kW 1,94 1,94 2,80 2,80
Hz 50 50 50
V
A 3,41 3,41 4,92 4,92
rps - rpm
- Disassembly using standard tools. Disposal and recycling using an appropriate
m
°C
°C Please refer to the operating conditions given in this manual or
in the specific conditions given in the Carrier selection programs.
-
30RBM/30RBP
220 260 300 330 360
85,7 85,7 87,5 87,5 87,5
86,9 86,9 88,2 88,2 88,2
86,4 86,4 87,5 87,5 87,5
IE3
Same as above
Same as above
2 2 2 2 2
2,2 2,2 3 3 3
2,80 2,80 3,81 3,81 3,81
50 50 50 50 50
4,92 4,92 6,81 6,81 6,81
company.
< 1000
(6)
< 40
Non ATEX environment
30RBM/30RBP
260 300 330 360
87,5 87,5 87,5 87,5
88,2 88,2 88,2 88,2
87,5 87,5 87,5 87,5
IE3
Same as above
Same as above
2 2 2 2 2
2,2 3 3 3 3
3,81 3,81 3,81 3,81
50 50 50 50 50
3 X 400
6,81 6,81 6,81 6,81
48 - 2900
company.
< 1000(6)
< 40
Non ATEX environment
400 430 470 520
89,9 89,9 89,9 89
90,4 90,4 90,4 90
89,6 89,6 89,6 89,7
2 2 2 2
4 4 4 5,5
4,96 4,96 4,96 6,80
50 50 50 50
8,27 8,27 8,27 11,30
400 430 470 520
89,9 89,9 89,9 89
90,4 90,4 90,4 90
89,6 89,6 89,6 89,7
2 2 2 2
4 4 4 5,5
4,96 4,96 4,96 6,80
50 50 50 50
8,27 8,27 8,27 11,30
21