Final Shutdown; Shutting Down; Recommendations For Disassembly; Fluids To Be Recovered For Treatment - Carrier AQUASNAP 30RBM Series Installation, Operation And Maintenance Instructions

14 - FINAL SHUTDOWN

14.1 - Shutting down

Separate the units from their energy sources, allow them to cool then drain them completely.

14.2 - Recommendations for disassembly

Use the original lifting equipment.
Sort the components according to their material for recycling or disposal, in accordance with regulations in force.
Check whether any part of the unit can be recycled for another purpose.

14.3 - Fluids to be recovered for treatment

• Refrigerant
• Heat-transfer fluid: depending on the installation, water, brine solution, etc.
• Compressor oil

14.4 - Materials to be recovered for recycling

• Steel
• Copper
• Aluminium
• Plastics
• Polyurethane foam (insulation)

14.5 - Waste Electrical and Electronic Equipment (WEEE)

At the end of its life, this equipment must be disassembled and contaminated fluids removed by professionals and processed
via approved channels for electrical and electronic equipment (WEEE).
71