1. Manuals
  2. Brands
  3. Sima Manuals
  4. Saw
  5. COBRA-40-G13H
  6. Manual

Sima COBRA-40-G13H Manual

Floor saw
Hide thumbs Also See for COBRA-40-G13H:
Table of Contents

Advertisement

Quick Links

ENGLISH

EC DECLARATION OF CONFORMITY

S
I
M
A
,
S
.
A
.
S
I
M
A
,
S
.
A
.
Polígono Industrial Juncaril, C/ Albuñol, Parcela 250 C.P. 18220 Albolote, Granada (SPAIN)
Company responsible for the manufacturing and commercialisation of the below specified
machine:
FLOOR SAW
DECLARES
That the above mentioned floor saw designed for cutting joints onto asphalt, concrete surfaces
and other road works is in conformity with the provisions of the following EC directives of the
European Parliament:
2006/42/CE; 2000/14/CE; 2002/44/CE; 2002/95/CE; 2002/96/CE
Standards applied:
UNE-EN 292-1; UNE-EN 292-2; UNE-EN 294; UNE-EN 349; UNE-EN 500-1;
UNE-EN 13862:2002+A1=2009
UNE-EN 1050; UNE-EN 953
Responsible for the Technical Files Development
Eugenio Fernández Martín
Technical Manager
SIMA, S.A.
Polígono Industrial Juncaril, C/ Albuñol, Parcela 250 - 18220 Albolote, Granada (SPAIN)
Albolote 01.01.2010
The undersigned
the General Manager
Javier García Marina
3

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the COBRA-40-G13H and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Sima COBRA-40-G13H

Summary of Contents for Sima COBRA-40-G13H

  • Page 1: Ec Declaration Of Conformity

    UNE-EN 13862:2002+A1=2009 UNE-EN 1050; UNE-EN 953 Responsible for the Technical Files Development Eugenio Fernández Martín Technical Manager SIMA, S.A. Polígono Industrial Juncaril, C/ Albuñol, Parcela 250 - 18220 Albolote, Granada (SPAIN) Albolote 01.01.2010 The undersigned the General Manager Javier García Marina...

  • Page 2: Table Of Contents

    ENGLISH CONTENTS EC DECLARATION OF CONFORMITY..............3 1. GENERAL INFORMATION .................5 2. DESCRIPTION OF THE MACHINES ..............5 2.1 PICTOGRAMS ........................5 3. TRANSPORT ....................6 4. ASSEMBLY INSTRUCTIONS................6 DELIVERY CONDITIONS..................... 6 HOW TO ASSEMBLE THE HANDLEBAR.ADJUSTABLE POSITION ..........6 HOW TO ASSEMBLE THE DEPTH CRANK ................6 HOW TO PLACE THE BLADE....................

  • Page 3: General Information

    We recommend you to have this manual at hand while the saw is being used 2. DESCRIPTION OF THE MACHINES • The floor saws SIMA S.A., model COBRA 40/45, are designed and manufactured to cut onto flat surfaces asphalt, concrete, terrazzo, granite or ceramics. High-speed diamond blades are used and advancement is manual.

  • Page 4: Transport

    ENGLISH USE SAFETY FOOTWEAR USE SAFETY GLOVES 3. TRANSPORT For short distances, the floor saw COBRA 40 can be transported onto its own wheels. Raise the blade fully and move the saw manually. When the machine must be lifted, use the hook located on the front part. It will be then easy to fix steel cables or chains.

  • Page 5: Petrol Engine

    ENGLISH The blade guard of the model COBRA 40/45 (P, Fig.6) can be lifted at one of its ends: assembly and blade replacement are then quick and easy. To place or change the blade, you must proceed as follows: • Loosen the screw (A, Fig.6) from the chassis using the 17 mm flat spanner supplied with the machine. There is not need to remove it completely.

  • Page 6: Operating Instructions And Use

    ENGLISH 5. OPERATING INSTRUCTIONS AND USE Warning: you must follow all the mentioned safety recommendations and comply with the directives about labour accidents and risks. F. WATER TANK The floor saw COBRA 40/45 is supplied with a water tank of 40 litres (D, Fig.8). HEIGHT REGULATION The floor saws COBRA are equipped with a height regulation system which is situated on the depth crank located on the front part of the machine (M, Fig.8).

  • Page 7: Safety Recommendations

    • At the end of each working day turn the machine off and disconnect it. SIMA, S.A. will not be held liable for consequential or other damages in connection with the floor saw COBRA or by reason of or the inability to use the machine for any purpose.

  • Page 8: Blade Fitting

    The cutting blade is one of the most important elements of the floor saw. A good blade is fundamental to get an utmost performance of the machine. Change it ASAP if necessary. Always use genuine SIMA blades and choose the most appropriate for the material being cut. SIMA S.A. offers you a wide range for all your applications...

  • Page 9: Troubleshooting Guide

    Reduce the advancement Belts are slipping over the pulleys Early wear of the transmission belts Use the appropriate blade. Pulleys incorrectly tensioned Re –tension pulleys 8. TECHNICAL DATA COBRA-40-G13H COBRA-40-G13,5R DATA MOTOR HONDA GX390 ROBIN EH41D FUEL TYPE Unleaded unleaded...
  • Page 10 ENGLISH COBRA-45-G13H COBRA-45-G13,5R DATA MOTOR HONDA GX390 ROBIN EH41D FUEL TYPE unleaded unleaded ENGINE START-UP recoil recoil MAXIMUM POWER 13HP/9,6KW 13,5HP/9,9KW 3600 R.P.M. 3600 R.P.M. ADVANCEMENT Manual Manual Ø BLADE CAPACITY 450 mm 450 mm Ø BLADE BORE SIZE 25,4 mm 25,4 mm BLADE MOUNTING Right hand side...

  • Page 11: Warranty

    SIMA, S.A. is free to modify its saws without prior notice 10. SPARE PARTS The spare parts available for the floor saws model COBRA 40/45, manufactured by SIMA, S.A. are identified in the spare map included in this manual. For any spare parts order, contact our After-Sales Service and indicate your part number, model, serial number and year of manufacturing.

  • Page 12: Electrical Diagrams

    ENGLISH 14. ELECTRICAL DIAGRAMS ELECTRICAL DIAGRAMS COBRA 40-45 G13 Motor Robin...
  • Page 13 ENGLISH ELECTRICAL DIAGRAM COBRA 40-45 G13 Motor Honda...
  • Page 14 ENGLISH...
  • Page 15 ENGLISH...
  • Page 16 ENGLISH...

  • Page 17: Warranty Certificate

    8.) In case of breaking down in a motor or engine during the warranty period they have to be send to SIMA S.A or to the technical service authorized in the country by the manufacturer of themselves 9.) To be benefit of the warranty, the warranty certificate must be in SIMA S.A premises within 30 days period from the purchasing date.
  • Page 18 ENGLISH...

  • Page 19: Warranty Certificate

    8.) In case of breaking down in a motor or engine during the warranty period they have to be send to SIMA S.A or to the technical service authorized in the country by the manufacturer of themselves 9.) To be benefit of the warranty, the warranty certificate must be in SIMA S.A premises within 30 days period from the purchasing date.
  • Page 20 ENGLISH...

This manual is also suitable for:

Cobra-40-g13,5r

Table of Contents