Table of Contents
Advertisement
2.5. Removal procedure
A procedure until it removes a board from a server is shown. For this procedure, removal of a cable and the
removal procedure of a SFP+ module are described. When you remove individually, please carry out a procedure
until it removes the candidate for removal.
In addition, it is not necessary to turn the power of the server OFF, when a cable or SFP module is removed.
Remove the cable
1
Pull the cable with pressing down the latch of
the cable
IMPORTANT:
Remove the SFP+ module
2
1. Flip down the Lever of the SFP+ module
2. Remove the module from the slot toward to
the arrow
IMPORTANT:
Attach the slot cover to the slot.
3
Remove the adapter from the server.
4
Turn the power off after shutdown process on
the OS. Then, unplug the power cord of the
server.
For detail information, See the User's guide
of the server.
Please use a driver etc., when
you are hard to press down a
latch.
Attach the dust cover to the SFP+
module. The cover has been
secured.
1
2
19
Advertisement
Table of Contents
