Trouble Shooting; Unable To Start The System - NEC N8104-128 User Manual

10gbase adapter (sfp+/2ch)

Hide thumbs Also See for N8104-128:

Table of Contents

4. Trouble Shooting

Check the adapter installation

□ Make sure the adapter is mounted proper slot

Check the slot is conformed to mount the adapter. Refer to the User's Guide of the server.

If the adapter in not seat proper slot, Seat the adapter to proper slot.

□ Make sure the adapter is connected to PCI-Express® slot firmly

Check the adapter is connected firmly. If it is not so , Re-install the adapter

Check the screw(or clip) on the server for bracket fixing is not loose

□ Make sure equipments on the Server has no failures.

Make sure that the PCI-Express® slot does not broke, or foreign substance has not entered.

If it is so, Please contact to reseller, sales agents or service representative

□ Verify that your server is using the Latest BIOS

Check the version of the system BIOS.

If the version is not proper, Update the system BIOS to latest version.

Check the adapter

□ Make sure the adapter is not broken

Check the component on the adapter.

If it has broken, Please contact to reseller, sales agents or service representative

□ Make sure the adapter has not entered foreign substance

Check the component on the adapter.

If it has foreign substance, Please contact to reseller, sales agents or service representative

□ Make sure a foreign substance has adhered to the connector of a board.

Check the PCI-Express® connector on the adapter.

If a foreign substance has adhered to the PCI-Express® connector, wipe off with soft cloth etc.

Table of Contents