Table of Contents
Advertisement
2. Hardware Installation
This chapter has described the procedure of attaching this product to the Server, and the related procedure.
IMPORTANT:
Unplug all power cords
Turn the power off and unplug the power before removing the computer's cover. Failure to
do so could endanger you and may damage the adapter or computer
Débranchez tous les cordons d'alimentation
Coupez le courant et débranchez l'alimentation avant de retirer le couvercle de l'ordinateur. Ne pas le faire
pourrait vous mettre en danger et peut endommager l'adaptateur ou de l'ordinateur
Do not look directly into the laser beam
The N8104-129 SFP+ module (10G-SR) is classified as a Class 1 Laser Product. A class
1 laser will not be harmful to the human body. However, do not look directly into the LAN
port during operation. Keep any vacant LC connector covered with a dust cover when you
do not use it or you transport it.
Ne pas regarder directement dans le faisceau laser
Le N8104-129 SFP+ module (10G-SR) est classé comme un produit de classe 1. Un laser de
classe 1 ne sera pas nuisible pour le corps humain. Cependant, ne regardez pas directement dans
le port LAN pendant l'opération. Gardez tout LC vacants connecteur recouvert d'une housse de
protection lorsque vous ne l'utilisez pas ou vous le transportez.
Install the hardware before installing the driver software
Avoid installation in extreme temperature conditions.
Immediately after the server is powered off, its internal components such as heat sink are very hot.
Leave the server until its internal components fully cool down before installing/removing any
component.
Stay away from the fan.
Keep your hand or hair away from the cooling fan on the adapter.
Failure to follow this warning may get your hand or hair caught in the fan, resulting in injury.
Restez à l'écart du ventilateur.
Gardez votre main ou les cheveux loin du ventilateur sur la carte.
Le non-respect de cet avertissement peut obtenir votre main ou les cheveux pris dans le ventilateur,
entraînant des blessures.
Ground yourself to dissipate any static charge before handling the
adapter.
To prevent any damage on components due to static electricity, make sure to discharge
static electricity from yourself before you touch N8104-128 adapter.
Don't touch uncoated metal parts on adapter.
Never touch N8104-128 adapter's LAN port, terminals of components or uncoated metal
parts on adapter. Otherwise, taint, erosion or others may cause loose connection. Do
not touch this product with wet or dirty hands.
15
Advertisement
Table of Contents
