Setup; Selecting And Mounting Bracket - NEC NE3304-149 User Manual

4.Setup

4-1. Selecting and Mounting Bracket

This product is shipped with low-profile bracket mounted. If this product is installed in the PCI slot of
full-height type, you need to replace the bracket with full-height one.
1. Two screws at which a bracket is held are removed.
2. Bracket is exchanged.
3. Bracket is fixed by a screw.
Screw 2p
 When exchanging Bracket, please remove SFP+ Module and DA cable.
Tips
 Keep the removed bracket for future use.
Important
- 37 -