Thank you for purchasing our N8104-7149 10GBASE Adapter (2ch). This manual is a guidance to install and use N8104-7149 10GBASE Adapter (2ch) (hereafter referred to as "this product") properly and safely. Read this manual before handling this product. If you have any problem when using this product, use this manual for your help.
Any other trademarks or trade names mentioned are the property of their respective owners. Notes: No part of this manual may be reproduced in any form without the prior written permission of NEC Corporation. This manual might be revised without any announcement in the near future.
Keep this User's Guide at hand for quick reference at anytime necessary. Be sure to read "Notes on Use" and "Handling Precautions". Notes on Use - Be sure to read - The following includes information necessary for proper and safe operation of this product. Refer to “Names and Features of Component”...
Attentions Indicates a general notice or warning that cannot be specifically identified. Indicates the presence of a hot surface or component. Touching this surface could result in bodily injury. Indicates that improper use may cause an electric shock. Indicates that improper use may cause fumes or fire. Prohibited Actions Indicates a general prohibited action that cannot be specifically identified.
Safety Notes This section provides notes on using the product safely. Read this section carefully to ensure proper and safe use of the product. For symbols, see (Safety Indications). WARNING Do not use the product for services where critical high availability may directly affect human lives or high reliability is required.
CAUTION Pay attention to hot surface Immediately after the server is powered off, its internal components such as hard disk drives are very hot. Leave the server until its internal components fully cool down before installing/removing any component. Insert the board firmly. Connect the board into PCI slot securely.
Handling Precautions (for proper operations) Be sure to observe the following precautions for the proper operation of the product. Ignoring the precautions may cause property damage (data and other device). This product is an electronic component sensitive to static electricity. Before handling this product, touch the metal frame part of the server to discharge static electricity from your body.
Regulatory notices FCC Statement This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications.
About This Guide This manual is a guidance to install and use N8104-7149 10GBASE Adapter (SFP+/2ch) properly and safely. Read carefully before using this product, and keep this manual at hand for quick reference at any time necessary. When relocating the product, make sure to relocate this guide along with the product.
In the Package The carton contains various accessories, as well as the product itself. See "2. In the Package" to make sure that you have everything and that individual components are not damaged. If you find any component missing or damaged, contact your sales representative. Transfer to Third Party Make sure to provide all accessories including this manual along with the product to a third party.
Contents Notes on Use - Be sure to read - ....................25 Safety Indications ..........................25 Safety Notes............................27 Handling Precautions (for proper operations)................29 Regulatory notices..........................30 About This Guide ..........................31 Notations used in the text ........................ 31 In the Package ...........................
1.About This Product 1-1. Characteristics of This Product N8104-7149 10GBASE Adapter (SFP+/2ch) is a controller board dedicated to NX7700x series product. This PCI card has two ports of SFP interface, and N8104-7129 SFP+ module(10G-SR) or a DA(Direct Attach) cable can be connected.
2.In the Package The carton box contains the following components. If you find missing or damaged component, contact your sales representative. Name Q'ty Remarks 10GBASE Adapter (SFP+/2ch) Equipped with low profile PCI bracket Full-height PCI bracket Document This guide Warranty Only use in Japan.
3.Names and Features of Component Bracket Link SFP slot (PORT2) SFP slot (PORT1) Link PCI Express connector (1) PCI Express connector Connect with PCI slot in the server. This product has PCI Express connector of x8 type. Tips (2) Bracket Used to secure the product to additional slot in the server.
4.Setup 4-1. Selecting and Mounting Bracket This product is shipped with low-profile bracket mounted. If this product is installed in the PCI slot of full-height type, you need to replace the bracket with full-height one. Screw 2p Two screws at which a bracket is held are removed. Bracket is exchanged.
4-2. Installing the Product Follow the steps below to install this product to the server. WARNING Disconnect the power plug before working with the product. Before installing this product in the server, disconnect the power plug from a power outlet. In addition, do not connect or disconnect the power plug while your hands are wet.
4-3. Installation SFP+ Module Install SFP+ Module to SFP slot. When Connecting SFP+ module, Do not flip the lever downward. Important Listen for an audible clicking sound when the SFP+ module is inserted into the SFP slot 4-4. Connecting the Network Cable Remove the dust cover from SFP+ module.
4-5. Removal A procedure until it removes a board from a server is shown. For this procedure, removal of a cable and the removal procedure of a SFP+ module are described. When you remove individually, please carry out a procedure until it removes the candidate for removal. In addition, it is not necessary to turn the power of the server OFF, when a cable or SFP module is removed.
5.Installing the Driver Software Install the card to the Server before install the LAN driver. Important To change the LAN driver settings, sign-in to the system from a local console using an administrator/root account. Operations using Remote Desktop feature or other remote control tools are not supported. (1) Driver Installation for Windows Windows Server 2012 R2 If you already applied the Windows Server 2012 R2 Support Kit or StarterPack, When you start the...
6.Trouble Shooting 6-1. Unable to Start the System Check the adapter installation Make sure the adapter is mounted proper slot Check the slot is conformed to mount the adapter. Refer to the User’s Guide of the server. If the adapter in not seat proper slot, Seat the adapter to proper slot. Make sure the adapter is connected to PCI-Express®...
6-2. Unable to Connect the Network Check the cable Make sure the cable latch has locked Check the latch of the cable.If it is not locked, Re-connect the cable. If the latch is broken, replace the cable. Make sure the cable has not bent Check the cable routing.If the cable has bent tightly or has any damage, replace the cable.