Bracket Replacement - NEC N8104-182 User Manual

2.1. Bracket Replacement

Depending on the type of system, installation of this product requires either a standard bracket or a low-profile
bracket. NEC provides both of these brackets with the product. By default Full Height bracket is attached. Please
replace the bracket according to the following steps as necessary.
1.
Remove screw on this product with a screw driver.
2.
Remove the attached bracket and install the other bracket. Please keep the removed bracket.
3.
Attach the bracket with the bracket fixing screw.
When attaching / detaching the bracket, move the bracket in the direction shown in the following figure.
N8104-182
Detach
Attach
NOTE:
N8104-184
Detach
Attach
Detach
Attach
N8104-183
Detach
Attach
Detach
Attach
E-13