Installing The Memory Module; Removing The Smart Card Cage - Dell P26S Owner's Manual

3. Pull the clips securing the memory module until the memory module pops up [1].
4. Remove the memory module from the system board [2].

Installing the memory module

1. Insert the memory module into the memory module socket until the clips secure the memory
module.
2. Install the:
a. battery
b. base cover
3. Follow the procedures in

Removing the smart card cage

1. Follow the procedure in
2. Remove the:
a. base cover
b. battery
3. To remove the smart card cage:
a. Disconnect the touchpad cable [1,2].
b. Remove the screws that secure the smart card cage to the system board [3].
c. Lift the smart card cage from the system board [4].
16
After working inside your
Before working inside your
computer.
computer.