Installing The Indoor Unit - Huawei NetCol5000-A035 Quick Manual

3

Installing the Indoor Unit

1. Read the related user manual or instructions before installing the NetCol5000-A.
2. The unit in this document is a fully configured NetCol5000-A. If some components are not
configured, skip the corresponding steps.
3. You are recommended to use tools that are fully insulated when installing devices.
4. Only engineers from the manufacturer or engineers certified by the agent are allowed to install,
commission, and maintain smart cooling products. Otherwise, personal injuries and device
damage may be caused, which is beyond the smart cooling product warranty range.
Removing the Float Sheet Metal
3.1
Evaporator
Water
pan
Water tank
(Optional) Installing an Enclosure Frame
3.3
1. Open the front door. Remove the front door,
the power cable of the display screen,
ground cable, fixing plate, connection plates,
and hinges.
2. Move the enclosure frame to the front door,
and adjust the anchor bolts of the enclosure
frame to ensure that the enclosure frame has
the same height with the cabinet.
3. Secure the enclosure frame to the front door
using eight M5 screws, as shown in the right
figure.
Removing the Three Sheet
3.2
Metals from the Compressor
Remove
Tighten
Connect
Preserve the removed sheet metals. Reinstall
them if the equipment is to be relocated
(container scenario).
5
M8 (3 PCS)
15 N•m