Advertisement
UNINET IMAGING INC. • BROTHER 1240/1650 • DISASSEMBLING THE TONER CARTRIDGE
UNINET IMAGING INC. • BROTHER 1240/1650 • ASSEMBLING THE TONER CARTRIDGE
UNINET IMAGING INC. • DELL C 5100 CARTRIDGE REMANUFACTURING INSTRUCTIONS
11. Wipe the seal opening and surroundings clean using iso-
propyl alcohol and a lint free cloth.
13. Remove the adhesive backing of the Clearseal
fully place over the opening as shown. Apply pressure using
your fingers to ensure a tight seal.
USA • UK • EUROPE • AFRICA • JAPAN • CHINA • BRAZIL • MEXICO • COLOMBIA • ARGENTINA • VENEZUELA
11124 Washington Blvd., Culver City, CA, U.S.A. 90232 • Ph +1 310 280 9620 • Fx +1 310 838 7294 • techsupport@uninetimaging.com
© 2008 UniNet Imaging Inc. All Trademark names are property of their respective owners. Product brand names mentioned are intended to show compatibility only.
™
and care-
w w w.
u n i n e t
UniNet Imaging does not warrant downloaded information. Summit Technologies is a division of UniNet Imaging Inc.
INSTALLING THE CLEARSEAL
12. Make sure that the new seal is being placed in its proper
position (shown) before applying.
NOTE: Optional UniNet Clear Seal
in Dell C 5100 OEM BK/C/M/Y toner cartridges (UniNet part
#10353).
14. gently wrap the seal flap around the toner fill opening (as
shown) while you prepare to insert the cartridge. This will
ensure that the seal flap properly exits the opposite end of the
container.
i m a g i n g . c o m
™
ADHESIVE
™
universal adhesive for use
Advertisement
