Table of Contents
Advertisement
About the Flash RAM Card
About the Flash RAM Card
Use the Flash RAM card to store the DECserver operational software, which can then
be used to load the DECserver rather than using a load host available on the LAN. The
Flash RAM may be updated with later releases of operational software. For
instructions on how to update the operational software in Flash RAM, refer to the
Network Access Software Management Guide.
The Flash RAM card is keyed and cannot be inserted improperly.
The card can be hot swapped and may be inserted or removed at anytime.
After you load the DECserver software, the card may be left in place or removed.
Unless there is a load host available on the network, we recommend leaving the Flash
RAM card in place in case the DECserver software needs to be reloaded.
3-2 Installing and Removing the Flash RAM Card
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the DECserver 716 and is the answer not in the manual?
Questions and answers