Programming The Desired Values - Leica CM1900 Instruction Manual

8. Operation
8.7

Programming the desired values

24
Turning the lamp on and off
• Turn the lamp on or off.
Setting the time
• Set the time.
• The actual time is set with the +/- buttons in the
control panel marked with the clock symbol.
When pushing the + or - button for more than 1 s,
the time value increases or decreases continu-
ously (Autorepeat-function).
Programming the temperature of the cryochamber
• Select the desired temperature of the cryochamber.
• The temperature of the cryochamber is set and in-
dicated on the control panel marked with the cry-
ostat symbol.
The actual temperature is the standard indication.
For indication of the desired value, touch the + or -
button.
Set the desired value via the + / - buttons. When
pushing the + or - button for more than 1 s, the cham-
ber temperature value increases or decreases
continuously.
The actual value will be indicated 5 seconds after
finishing the programming.
Instruction manual V 5.3 – 10/2006