Firmware For Each Device - Yealink MVC Ⅱ Series Deployment Manual

2. Enter the administrator password (default: sfb) to access the Setup screen.
3. Navigate to Windows Settings.
4. Select Administrator from the bottom-left corner and then enter the administrator password.
5. Do one of the following:
•
Long tap the
Select the desired device and then long tap the device to select Update driver.
Select the desired way to update.
•
Tap the button, and then go to Settings > Upgrade & Security > Windows Update, and select
Check for updates.
Select the desired device and then complete the installation.

Firmware for Each Device

The firmware versions of the devices in the MVC Ⅱ system need to match each other.
The following table lists the associated and latest firmware name for each device:
Device Model
Camera-Hub
UVC30
UVC80/UVC50
Yealink Plug-in Software(Yealink RoomConnect)
MTouch Ⅱ
The information mentioned in this document is applicable to Microsoft Teams APP in version 4.3.42.0 or
later,
button and then select Device Manager.
Firmware Name
84.421.0.5.rom or later
105.420.0.10.rom or later
92.421.0.5.rom or later
2.1.17.0 or later
126.410.0.5.rom or later
| Troubleshooting | 39