Upgrade The Firmware - Yealink UVC34 Quick Start Manual

VCR20 Remote Control Instructions
No. Item
Tracking Long press the Tracking Mode key to switch between auto framing and
1
Mode Key PTZ mode.
2 Mute Key Mute or unmute the microphone.
Navigation
3 Pan and tilt the camera to adjust the viewing angle.
Key
Scroll • Scroll up to zoom camera in.
4
Wheel • Scroll down to zoom camera out.
Preset • Long press the number key to add/update the preset position.
5
Key • Short press the number key to apply the preset position.
Volume
6 Adjust the volume.
Key

Upgrade the Firmware

Use Yealink Room Connect/USB Connect software to upgarde the firmware after
connecting to the PC.
For more information about how to upgrade the firmware, please refer to the
upgrading document.
Description
E
N
G
L
I
S
H
5