Searching For Your Code - One for All DVD EXPERT URC-4041 User Manual

IMPVE4P manual 1.0 4/11/03
PROGRAMMING DEVICE CONTROL
(continued)
5. Aim the remote control at the device and
press
POWER
off. If it does not, repeat steps 2 through 5
(starting on the previous page), trying
each code for your brand until you find
one that works. If it still doesn't work, try
Searching For Your Code below.
NOTE: If the device does not have a POWER
key, press the
6. Repeat steps 1 through 5 (starting on the
previous page) for each device you want to
control.For future reference,write down
each working device code in the following
boxes:
DVD/VCR
Device Type:____________________
Code:
AUX
Device Type:____________________
CBL/SAT
Device Type:____________________
TV Code:

SEARCHING FOR YOUR CODE

If your device does not respond to the remote control
after trying all codes listed for your brand, or if your
brand is not listed at all, try searching for your code.
NOTE: Before performing a code search for a CD or DVD player
or a VCR, turn on the device and insert the required media.
For example, to search for a code for your TV:
1. On the remote control, press
2. Press and hold
blinks twice, then release
3. Enter
9
4:34 PM Page 10
once. The device should turn
(Play) key.
Code:
Code:
once.
TV
until the (red light)
SET LED
.
SET
- - . The will blink twice.
9 1 LED
10