One for All URC-4063 EASY 4 User Manual

URC 4063
Easy 4

User Manual

Previous Model Name: Big Easy Select
Overview
Thank you for purchasing the One For All
universal remote control. Before you can use
your new remote, you will need to program it to
operate the specific home entertainment
components you wish to control. Follow the
instructions detailed in this manual to set up your
One For All ® Easy 4 and enjoy your new remote
control.
Features and Functions
The illustration below and the chart immediately
after describe the features and functions of the
One For All ® Easy 4 universal remote control. Use
the drawing to locate each key on the remote,
then refer to the chart for a description of the
corresponding function each key performs.
SETUP POWER
VCR/LD
CBL/SAT TV
MENU +
AUDIO MENU
CH +
M
VOL VOL
MENU
L
CH _
FAV CH
MENU –
ENTER TV/VCR
REC PAUSE
PLAY
REW FF
STOP
Attention
DO NOT USE the MENU- key on your One For All
STOP by Mitsubishi in 1996 or 1997, or on any TV manufactured in 1996 or 1997 using TV code 150. In
1996, Mitsubishi changed the frequency used to operate the menu down feature on these TVs.
Consequently, using the MENU- key on your One For All
Mitsubishi TVs or with TVs using TV Code 150 will put your TV in a service mode. Universal
Electronics Inc. assumes no responsibility for this change in the manufacturer's design or for any
damage to your TV or any other damages that you incur as a result of these changes.
Feature
SETUP
CH +
VOL
VOL
CH _
M
POWER
ENTER
TV/VCR
0 - 9
0 - 9
® Easy 4
TV VCR/LD
CBL/SAT AUDIO
MENU
STOP
SEE
BELOW
MENU
FAV CH
R
PREV CH
PREV CH
PAUSE
REC
PLAY
REW
STOP
Consumers
® Easy 4 remote control with TVs manufactured
Function
The Red Light (LED) flashes red to
show that the remote is working.
The SETUP key is used to program
your One For All ® Easy 4 .
The GLOW keys: VOL +/- (Volume Up
and Down), CH +/- (Channel Up and
Down), M (Mute), POWER, TV/VCR,
ENTER and the Digit Keys (0-9)
operate the same as on your original
remote. These keys are made of a
phosphorescent material that
Glows-in-the-dark. To activate the
"GLOW" Feature, you must expose
the GLOW Keys to bright light. The
length of time the GLOW Keys
remain illuminated will be deter-
mined by the length of time the
remote is exposed to bright light.
The TV, VCR/LD, CBL/SAT, and AUDIO
keys are used to select the home
entertainment component you want
to control.
The MENU key operates the same as
the MENU or OSD (On Screen
Display) key on your original remote.
When you press the MENU key, your
One For All ® Remote Control enters
the menu mode and enables the
CH +/- and VOL +/- keys to navigate
through your menu. Pressing one of
the device keys will exit the remote
control's menu mode and revert CH
+/- and VOL +/- to their original
functions. If your original remote
control had a SELECT key, for use in
your menu, try M (Mute) or ENTER.
Please consult the original owners
manual of your home entertainment
component for more detailed
instructions on accessing and
navigating your on-screen menus.
The FAV CH (Favorite Channel) key
allows you to program your One For
All ® Easy 4 with up to 10 of your
favorite channels.
The PREV CH (Previous Channel) key
operates the same as the LAST
CHANNEL or RECALL key on your
original remote.
The REC (Record), PAUSE, REW
(Rewind), PLAY, FF (Fast Forward), and
STOP keys operate the same as the
keys on your original VCR and CD
FF Player remote. As a safety feature
on the One For All ® Easy 4 , you must
press the REC key twice.
® Easy 4 remote control with these
Installing the Batteries
Your One For All ® Easy 4 requires four (4) new AAA alkaline
batteries. To install the batteries:
1
On the back of the One For All
push down on the tab and lift the battery
cover off.
Match the + and - marks on the batteries
2
to the + and - marks in the battery case,
then insert the batteries.
3
Press the battery cover back into place.
4
Test the unit by pressing POWER. If the
batteries are inserted correctly, the red light
POWER (LED) will blink once.
Removing the batteries for more than 15 minutes will
NOTE:
require you to reprogram your remote.
Setting Up Your Components
Programming the One For All ® Easy 4 to operate
your TV:
Locate the brand name of your TV and then write
it in the space below.
TV Brand: ______________________________________
Locate the brand name of your TV in the "SETUP
CODES FOR TVs" section. The brands are listed in
alphabetical order with the most popular codes
listed first. You will use one of these codes to
program your One For All Easy 4 to operate your TV.
To program the One For All Easy 4 to operate your
TV:
1 Turn on your TV.
2 Press TV and release. Press and hold
SETUP until the One For All
light blinks twice, then release SETUP.
TV SETUP
3 Enter the first three-digit TV code listed
for your brand in the "Set-Up Codes for
TVs" section. If you perform this
procedure correctly, the red light will
blink twice when you enter the final
digit of your code.
4 Aim the One For All ®
and press POWER. Your TV should turn
off. If your TV does not respond, repeat
Steps 2-4, trying each code listed for
your brand until you find the one that
operates your TV.
®
5 Your One For All Easy 4 is now
programmed to operate your TV. Write
your TV code in the boxes to the left for
future reference.
Remember, if you want to use your One For All
Easy 4 to operate your TV, press the TV key first.
Set-Up Codes for TVs
Anam
A-Mark 003
National
Admiral 093, 016, 180,
AOC
165, 179
Adventura 046
Archer
Aiko 092
Audiovox
Akai 030, 056, 145,
Belcor
151
Bell &
Alleron 179
Howell
Ambassador 177
Blue Star
Amstrad 171, 177
BPL
Anam 180
Bradford
®
Easy 4 ,
®
Easy 4's red
Easy 4 at your TV
®
055
030, 019, 185, 137,
003, 180, 056
003
180, 003
019, 030
016, 154, 179, 180
282
282
180