How do I program my One for All URC 4021 universal remote?

You can program your One for All URC 4021 universal remote using either a direct code setup or a code search method. To program using a direct code setup:Turn on a desired device (e.g., VCR or DVD player) and, if applicable, insert media (e.g., cassette or disc).On the remote control, press a device key once (i.e., VCR/PVR, DVD, CBL/SAT, or TV).Press and hold SET until the LED (red light) blinks twice, then release SET.Use the Manufacturer's Codes (starting on page 18) to locate the type of device and brand name, then enter the first four-digit code for your device. If performed correctly, the LED will blink twice.Aim the remote control at the device and press POWER once. The device should turn off. If it does not, repeat steps 2 through 5, trying each code for your brand until you find one that works.To program using a code search (if direct codes don't work or your brand isn't listed): On the remote control, press the device key (e.g., TV) once. Press and hold SET until the LED (red light) blinks twice, then release SET. Enter 99-1. The LED will blink twice. Aim the remote control at the device and slowly alternate between pressing POWER and the device key (e.g., TV). Stop when the device turns off (after pressing POWER). To lock in the code, press and release SET. The LED will blink twice. To search for the codes of your other devices, repeat steps 1 through 5, but substitute the appropriate device key for the device you are searching for. For more information, see pages 8, 9 and 18 of the manual.

How do I program a One for All URC 4021 universal remote to a TV without codes?

If your TV does not respond to the remote control after trying all listed codes for your brand, or if your brand is not listed at all, you can use the code search method:On the remote control, press TV once.Press and hold SET until the LED (red light) blinks twice, then release SET.Enter 99-1. The LED will blink twice.Aim the remote control at the TV and slowly alternate between pressing POWER and TV. Stop when the TV turns off (after pressing POWER). If the TV does not have a Power key, you can substitute another function, such as digits 0~9, CHA, or PLAY.To lock in the code, press and release SET. The LED will blink twice. For more information, see page 9 of the manual.

What devices can the One for All URC 4021 universal remote control?

The One For All URC-4021 universal remote control is designed to remotely operate up to four home entertainment devices. After programming, it can control devices such as:TVsDVD PlayersVCRsPVRs (or DVRs)Cable Boxes (or Converters)Satellite ReceiversVarious combos including TV/DVD Player, TV/VCR, DVD Player/VCR, and Cable Box/PVR. For more information, see pages 3 and 6 of the manual.

How do I reset my One for All URC 4021 universal remote?

To reset your remote control to its original factory settings, which will erase all custom settings and setup codes:Press and hold SET until the LED (red light) blinks twice, then release SET.Enter 981. The LED will blink twice, and the remote control will return to normal operation. For more information, see page 14 of the manual.

What should I do if my TV is not responding to the One for All URC 4021 remote?

If your TV is not responding to the remote, consider the following troubleshooting steps:If the LED blinks but the home entertainment device does not respond, make sure the remote control is aimed at your home entertainment device and is not farther than 15 feet away.If the unit does not control home entertainment devices or commands are not working properly, try all listed codes for the device brands being set up. Also, ensure they can be operated with an infrared remote control.If you have tried the Searching For Your Code method and still could not find a working code, clear the device key by pressing and holding SET until the LED blinks twice, then releasing SET and entering 9-9-2. Then press the device key to be cleared twice. After this, repeat the Searching For Your Code method on page 9. For more information, see pages 9 and 15 of the manual.

How do I use the One for All URC 4021 universal remote?

The One For All URC-4021 remote is designed to operate up to four home entertainment devices. You can select a desired home entertainment device to control by pressing its corresponding device key (VCR/PVR, DVD, CBL/SAT, or TV). The remote features intuitive buttons for easy access to functions and menus, and it includes a Power Macro for master on/off control of all your equipment with a single keystroke. For detailed information on specific button functions, you can refer to the Key Charts in the manual. For more information, see pages 3, 4 and 5 of the manual.

Where can I find the programming codes for my One for All URC 4021 remote?

You can find the programming codes for your One for All URC 4021 remote in the Manufacturer's Codes section of the manual, starting on page 18.

What should I do if the programming codes for my One for All URC 4021 remote are not working?

If the programming codes are not working:Repeat the programming steps (steps 2 through 5) and try each code for your brand until you find one that works.If it still doesn't work, try the Searching For Your Code method described on page 9.If the Searching For Your Code method also did not find a working code, you should clear the device key by pressing and holding SET until the LED blinks twice, then releasing SET and entering 9-9-2. Then press the device key to be cleared twice. After this, repeat the Searching For Your Code method on page 9. For more information, see pages 8, 9 and 15 of the manual.

How do I troubleshoot common problems with the One for All URC 4021 remote?

Common problems and their solutions for the One for All URC 4021 remote include:Problem: LED (red light) does not blink when you press a key.Solution: Replace batteries with two new AAA alkaline batteries.Problem: LED blinks when you press a key, but home entertainment device does not respond.Solution: Make sure the remote control is aimed at your home entertainment device and is not farther than 15 feet away.Problem: The unit does not control home entertainment devices or commands are not working properly.Solution: Try all listed codes for the device brands being set up. Make sure they can be operated with an infrared remote control.Problem: Changing channels does not work.Solution: If original remote required pressing ENTER or SELECT to change channels, press ENTER or SELECT on this remote after entering the channel number.Problem: Tried Searching For Your Code method and still could not find a working code.Solution: Clear the device key by pressing and holding SET until the LED blinks twice, then release. Next enter 9-9-2. Then press the device key to be cleared twice. Now repeat the Searching For Your Code method on page 9.Problem: No remote control of volume.Solution: See Changing Volume Lock on page 13 to lock/unlock volume. For more information, see pages 9, 13 and 15 of the manual.

How do I program my One for All URC 4021 remote for a Panasonic TV?

To program your remote for a Panasonic TV:Turn on your Panasonic TV.On the remote control, press the TV device key once.Press and hold SET until the LED (red light) blinks twice, then release SET.Use the Manufacturer's Codes (specifically on page 20 for TVs) to find the four-digit codes for Panasonic TVs. Enter the first four-digit code for your TV. If performed correctly, the LED will blink twice.Aim the remote control at the TV and press POWER once. The TV should turn off. If it does not, repeat steps 2 through 5, trying each code for Panasonic until you find one that works. If it still doesn't work, try the "Searching For Your Code" method on page 9. For more information, see pages 8, 9 and 20 of the manual.

Why is the volume control not working on my One for All URC 4021 remote?

If the volume control is not working, you should refer to the Changing Volume Lock section on page 13 of the manual to adjust the volume lock settings. For more information, see pages 13 and 15 of the manual.

Can the One for All URC 4021 remote control multiple devices simultaneously?

Yes, the One For All URC-4021 remote control is designed to remotely operate up to four home entertainment devices. It also features a Power Macro for master on/off control of all of your equipment with a single keystroke, allowing you to sequentially turn on or off all programmed devices with one button press. For individual control of functions other than power, you select the desired device using its device key. For more information, see pages 3 and 10 of the manual.

Why is my One for All URC 4021 remote not changing channels?

If your remote is not changing channels, it might be because the original remote required an additional button press. If your original remote required pressing ENTER or SELECT to change channels, you should press ENTER or SELECT on this remote after entering the channel number. For more information, see page 15 of the manual.

How do I set up the One for All URC 4021 remote if there is no dedicated setup button?

The One for All URC 4021 universal remote control uses the SET button for all programming sequences.

What type of batteries does the One for All URC 4021 remote use?

The One for All URC 4021 remote control uses two (2) new AAA alkaline batteries, which are not included with the remote. For more information, see pages 1, 3 and 7 of the manual.

One for All URC 4021 Manual

4 device universal remote control

Hide thumbs Also See for ONE FOR ALL URC 4021:

User manual (21 pages)

User manual (21 pages)

User manual (21 pages)

Table Of Contents

Table of Contents

Quick Links

See also: User Manual

UNIVERSAL REMOTE CONTROL

REPLACES

REMOTES

DVD

VCR/PVR

CBL/SAT

EASY SETUP

DIGITAL

READY*

FAVORITE

CHANNEL

MASTER

POWER KEY*

LIMITED

LIFETIME

WARRANTY

*See back for details

URC 4021

USES 2 AAA BATTERIES

(NOT INCLUDED)

Table of Contents

How do I program my One for All URC 4021 universal remote?
You can program your One for All URC 4021 universal remote using either a direct code setup or a code search method.

To program using a direct code setup:
1. Turn on a desired device (e.g., VCR or DVD player) and, if applicable, insert media (e.g., cassette or disc).
2. On the remote control, press a device key once (i.e., VCR/PVR, DVD, CBL/SAT, or TV).
3. Press and hold SET until the LED (red light) blinks twice, then release SET.
4. Use the Manufacturer's Codes (starting on page 18) to locate the type of device and brand name, then enter the first four-digit code for your device. If performed correctly, the LED will blink twice.
5. Aim the remote control at the device and press POWER once. The device should turn off. If it does not, repeat steps 2 through 5, trying each code for your brand until you find one that works.
To program using a code search (if direct codes don't work or your brand isn't listed):
1. On the remote control, press the device key (e.g., TV) once.
2. Press and hold SET until the LED (red light) blinks twice, then release SET.
3. Enter 99-1. The LED will blink twice.
4. Aim the remote control at the device and slowly alternate between pressing POWER and the device key (e.g., TV). Stop when the device turns off (after pressing POWER).
5. To lock in the code, press and release SET. The LED will blink twice.
6. To search for the codes of your other devices, repeat steps 1 through 5, but substitute the appropriate device key for the device you are searching for.
For more information, see pages 8, 9 and 18 of the manual.
Was this helpful?
How do I program a One for All URC 4021 universal remote to a TV without codes?
If your TV does not respond to the remote control after trying all listed codes for your brand, or if your brand is not listed at all, you can use the code search method:
1. On the remote control, press TV once.
2. Press and hold SET until the LED (red light) blinks twice, then release SET.
3. Enter 99-1. The LED will blink twice.
4. Aim the remote control at the TV and slowly alternate between pressing POWER and TV. Stop when the TV turns off (after pressing POWER). If the TV does not have a Power key, you can substitute another function, such as digits 0~9, CHA, or PLAY.
5. To lock in the code, press and release SET. The LED will blink twice.
For more information, see page 9 of the manual.
Was this helpful?
What devices can the One for All URC 4021 universal remote control?
The One For All URC-4021 universal remote control is designed to remotely operate up to four home entertainment devices. After programming, it can control devices such as:
- TVs
- DVD Players
- VCRs
- PVRs (or DVRs)
- Cable Boxes (or Converters)
- Satellite Receivers
- Various combos including TV/DVD Player, TV/VCR, DVD Player/VCR, and Cable Box/PVR.
For more information, see pages 3 and 6 of the manual.
Was this helpful?
How do I reset my One for All URC 4021 universal remote?
To reset your remote control to its original factory settings, which will erase all custom settings and setup codes:
1. Press and hold SET until the LED (red light) blinks twice, then release SET.
2. Enter 981. The LED will blink twice, and the remote control will return to normal operation.
For more information, see page 14 of the manual.
Was this helpful?
What should I do if my TV is not responding to the One for All URC 4021 remote?
If your TV is not responding to the remote, consider the following troubleshooting steps:
- If the LED blinks but the home entertainment device does not respond, make sure the remote control is aimed at your home entertainment device and is not farther than 15 feet away.
- If the unit does not control home entertainment devices or commands are not working properly, try all listed codes for the device brands being set up. Also, ensure they can be operated with an infrared remote control.
- If you have tried the Searching For Your Code method and still could not find a working code, clear the device key by pressing and holding SET until the LED blinks twice, then releasing SET and entering 9-9-2. Then press the device key to be cleared twice. After this, repeat the Searching For Your Code method on page 9.
For more information, see pages 9 and 15 of the manual.
Was this helpful?
How do I use the One for All URC 4021 universal remote?

The One For All URC-4021 remote is designed to operate up to four home entertainment devices. You can select a desired home entertainment device to control by pressing its corresponding device key (VCR/PVR, DVD, CBL/SAT, or TV). The remote features intuitive buttons for easy access to functions and menus, and it includes a Power Macro for master on/off control of all your equipment with a single keystroke. For detailed information on specific button functions, you can refer to the Key Charts in the manual.

For more information, see pages 3, 4 and 5 of the manual.

Was this helpful?
Where can I find the programming codes for my One for All URC 4021 remote?

You can find the programming codes for your One for All URC 4021 remote in the Manufacturer's Codes section of the manual, starting on page 18.

Was this helpful?
What should I do if the programming codes for my One for All URC 4021 remote are not working?
If the programming codes are not working:
- Repeat the programming steps (steps 2 through 5) and try each code for your brand until you find one that works.
- If it still doesn't work, try the Searching For Your Code method described on page 9.
- If the Searching For Your Code method also did not find a working code, you should clear the device key by pressing and holding SET until the LED blinks twice, then releasing SET and entering 9-9-2. Then press the device key to be cleared twice. After this, repeat the Searching For Your Code method on page 9.
For more information, see pages 8, 9 and 15 of the manual.
Was this helpful?
How do I troubleshoot common problems with the One for All URC 4021 remote?
Common problems and their solutions for the One for All URC 4021 remote include:
- Problem: LED (red light) does not blink when you press a key.
  - Solution: Replace batteries with two new AAA alkaline batteries.
- Problem: LED blinks when you press a key, but home entertainment device does not respond.
  - Solution: Make sure the remote control is aimed at your home entertainment device and is not farther than 15 feet away.
- Problem: The unit does not control home entertainment devices or commands are not working properly.
  - Solution: Try all listed codes for the device brands being set up. Make sure they can be operated with an infrared remote control.
- Problem: Changing channels does not work.
  - Solution: If original remote required pressing ENTER or SELECT to change channels, press ENTER or SELECT on this remote after entering the channel number.
- Problem: Tried Searching For Your Code method and still could not find a working code.
  - Solution: Clear the device key by pressing and holding SET until the LED blinks twice, then release. Next enter 9-9-2. Then press the device key to be cleared twice. Now repeat the Searching For Your Code method on page 9.
- Problem: No remote control of volume.
  - Solution: See Changing Volume Lock on page 13 to lock/unlock volume.
For more information, see pages 9, 13 and 15 of the manual.
Was this helpful?
How do I program my One for All URC 4021 remote for a Panasonic TV?
To program your remote for a Panasonic TV:
1. Turn on your Panasonic TV.
2. On the remote control, press the TV device key once.
3. Press and hold SET until the LED (red light) blinks twice, then release SET.
4. Use the Manufacturer's Codes (specifically on page 20 for TVs) to find the four-digit codes for Panasonic TVs. Enter the first four-digit code for your TV. If performed correctly, the LED will blink twice.
5. Aim the remote control at the TV and press POWER once. The TV should turn off. If it does not, repeat steps 2 through 5, trying each code for Panasonic until you find one that works. If it still doesn't work, try the "Searching For Your Code" method on page 9.
For more information, see pages 8, 9 and 20 of the manual.
Was this helpful?
Why is the volume control not working on my One for All URC 4021 remote?

If the volume control is not working, you should refer to the Changing Volume Lock section on page 13 of the manual to adjust the volume lock settings.

For more information, see pages 13 and 15 of the manual.

Was this helpful?
Can the One for All URC 4021 remote control multiple devices simultaneously?

Yes, the One For All URC-4021 remote control is designed to remotely operate up to four home entertainment devices. It also features a Power Macro for master on/off control of all of your equipment with a single keystroke, allowing you to sequentially turn on or off all programmed devices with one button press. For individual control of functions other than power, you select the desired device using its device key.

For more information, see pages 3 and 10 of the manual.

Was this helpful?
Why is my One for All URC 4021 remote not changing channels?

If your remote is not changing channels, it might be because the original remote required an additional button press. If your original remote required pressing ENTER or SELECT to change channels, you should press ENTER or SELECT on this remote after entering the channel number.

For more information, see page 15 of the manual.

Was this helpful?
How do I set up the One for All URC 4021 remote if there is no dedicated setup button?

The One for All URC 4021 universal remote control uses the SET button for all programming sequences.

Was this helpful?
What type of batteries does the One for All URC 4021 remote use?

The One for All URC 4021 remote control uses two (2) new AAA alkaline batteries, which are not included with the remote.

For more information, see pages 1, 3 and 7 of the manual.

Was this helpful?

Need help?

Do you have a question about the ONE FOR ALL URC 4021 and is the answer not in the manual?

Questions and answers

Janie Salinas

May 11, 2025

how to use the menu button on a urc4021B00

1 comments:

Mr. Anderson

May 20, 2025

To use the MENU button on the One for All URC 4021 remote, press MENU once to display your selected device’s main menu.

This answer is automatically generated

Summary of Contents for One for All ONE FOR ALL URC 4021

Page 1 UNIVERSAL REMOTE CONTROL REPLACES REMOTES VCR/PVR CBL/SAT EASY SETUP DIGITAL READY* FAVORITE CHANNEL MASTER POWER KEY* LIMITED LIFETIME WARRANTY *See back for details URC 4021 USES 2 AAA BATTERIES (NOT INCLUDED)
Page 7 Battery Precautions: Do not mix old and new batteries.• Do not mix alkaline, standard (carbon-zinc) or rechargeable (nickelcadmium)batteries.• Always remove old, weak or worn-out batteries promptly and recycle ordispose of them in accordance with Local and National Regulations. ‚ „ ƒ...
Page 8: Programming Device Control
VCR/PVR CBL/SAT POWER PLAY...
Page 10: Programming Master Power Macro
POWER POWER...
Page 12 ENTER 0 3 1 ENTER SELECT ENTER...
Page 14 IMPORTANT: Executing this program will erase all your custom settings for Power Macro, Favorite Channels, and Volume Lock. IMPORTANT: Executing this program will erase all your custom settings for Power Macro, Favorite Channels, Volume Lock, Reassigned Devices, and all device settings.
Page 18: Manufacturer’s Codes
continued on next page... continúa en la página siguiente...
Page 20 continued on next page... continúa en la página siguiente...
Page 22: Setup Codes For Vcrs
continued on next page... continúa en la página siguiente...

One for All URC 4021 Manual

Quick Links

Frequently Asked Questions (15)

Need help?

Questions and answers

Related Manuals for One for All ONE FOR ALL URC 4021

Summary of Contents for One for All ONE FOR ALL URC 4021

Page 8: Programming Device Control

Page 10: Programming Master Power Macro

Page 18: Manufacturer’s Codes

Page 22: Setup Codes For Vcrs

Table of Contents