Trouble-Shooting; Searching For Your Code - One for All LITE URC-2589 User Manual & Code Book

Trouble-Shooting

The Search Method
If your Television, Video Recorder or Satellite Receiver does
not respond to the ONE FOR ALL Lite after you have tried all
the codes listed for your brand, try the Search Method. The
Search Method may also work if your brand is not listed at all.
Let's say you cannot get your ONE FOR ALL Lite to control
your Television:
1 Switch your Television on.
2
Press the TV key on your ONE FOR ALL Lite.
3 Aim the ONE FOR ALL Lite at your
Television. Press and hold down
MAGIC
MAGIC until the ONE FOR ALL Lite's red
light blinks twice. Then, press 9 9 1. The
9 1 9
red light will blink twice.
4 Now, alternate between TV and POWER,
over and over, until your Television turns
off. You may have to press these keys
many times, so please be patient.
Remember to keep pointing the ONE
FOR ALL Lite at your Television when you
press the POWER and TV keys.
5 When your Television turns off,
press MAGIC. Don't forget, press MAGIC
MAGIC
as soon as your Television turns off. Now
your ONE FOR ALL Lite is ready to run
your Television.
Note:
- To search for the code for your Video or Satellite follow
the instructions above only press VCR or SAT during steps
2 and 4.
- If your Video's original remote control does not have a
power key, press PLAY instead of POWER when searching
for your code.
15