Advertisement
Available languages
Available languages
T R O U B L E S H O O T I N G
Blood pressure is extremely high or low.
???
Measurement is not taken with correct posture or the cuff is wrapped incorrectly.
Reconfirm the measurement procedures.
The reading was effected by moving or talking. Remain still and quiet during
measurement.
easurement was taken right after e ercise or other activities in uencing the
reading. Measure again after resting for more than 5 minutes. See TIPS ON
TAKING YOUR BLOOD PRESSURE.
Measured values vary all the time.
???
ental and physical condition or measurement condition is in uencing blood
pressure. Make measurement under the same conditions.
Measured value is different from that taken at a hospital.
???
Mental condition such as nervousness at a hospital or relaxed feeling at home is
in uencing blood pressure. Take records of blood pressure taken at home and
consult with your doctor.
Blood pressure is changing 24 hours a day in relation with mental and physical conditions.
Eating, drinking, smoking, exercising or bathing will alter blood pressure. Blood pressure
will also be in uenced by mental condition such as feeling tense or relieved and health
condition. It is important to know the trend of blood pressure by making measurement
regularly. Make your own rules including conditions and time to make measurement and
take blood pressure everyday.
[
symbol is displayed again in the course of in ation and de ation and in ation
of the cuff are repeated.
When the initial pressure was too high for blood pressure to be taken or if you move
or strain your arm or hand, the cuff is in ated again. De ation and in ation of the
cuff are repeated until blood pressure is taken. This does not indicate any problem
or malfunction of the monitor. Do not move or speak during measurement.
[Err 300] is displayed.
Over pressure: blood pressure could not be taken due to moving or speaking
although the cuff was in ated to the ma imum pressure. Do not move or speak
during measurement.
[Err -1] is displayed.
Blood pressure could not be taken due to moving or speaking. Do not move or
speak during measurement.
[Err -2] is displayed.
The cuff is not securely connected to the monitor. Secure the air connector.
The cuff is not wrapped appropriately. Reconfirm how to put the cuff on your arm.
[
] is displayed.
Batteries are weak. Replace all batteries with new ones.
[0 0] is displayed.
"START/STOP" KEY was being touched when batteries are being installed or when
AC adaptor is being plugged in. Turn off the monitor once with "START/STOP"
KEY.
-12-
Advertisement
