Notice To Routine Maintenance For Certain Mileage - Invacare Cetus Instruction Booklet

Cetus

8.3 Notice to Routine Maintenance for certain mileage

ITEM
Display I for Routine
Maintenance
Display II for Routine
Maintenance
1654724~A
The initial mileage of routine maintenance is 5,000 km.
Display:
When it reaches the mileage for routine maintenance, ODO symbol will
start to flash for 1 minute.
Time to display:
1. When the ODO reaches the mileage for routine maintenance during
driving.
2. When the ODO reaches the mileage for routine maintenance during
Key On.
F
E
PS. During flashing, the mobility vehicle could be driven normally and the
control panel could be operated without any delay.
After the routine maintenance is finished, the user could setup the
mileage for next maintenance. (Count down setting)
Setup steps:
1. Press「Mode」button and switch to ODO mode.
2. Key off to shut down the controller.
3. Press「Mode」and「H/L」buttons together.
4. Key on to start the controller.
5. The display will enter setup mode in 2 secs, the mileage will be
flashing (as Note 1).
6. Press or button to adjust to the mileage for next
maintenance (as Note 2).
7. After setup is finished, press any button of Parking light, Horn, Turn
signal or Headlight. The definitive settings will be stored and return to
normal working mode.
8. The display will quit to normal working mode when the user does not
press a button in 10 secs.
DESCRIPTIONS
AM
SPD ODO TRIP
Flashing
Instruction Booklet
L
21