Steering Lever Shroud Maintenance - Invacare Cetus Service Manual

Cetus
Please refer backward for reassembly and
replacement.
Caution:
Please refer to the previous page for upper
control wiring maintenance, re-connect the
connector B of the VR initiator controller. If it is
of no effect, please replace with a new
controller.
3-6 Steering lever shroud
maintenance:
Cross screwdriver x 1pcs
1. Refer to 2-1 Battery power-off: The scooter is
powered off.
2. Turn and remove the head adjustment
handle.
3. Remove the head actuating lever clamping
screws (M4 x12Lx2pcs).
4. Remove the head steering lever back shroud
clamping screws (M4 x12L x2pcs).
5. Remove the head steering lever back shroud.
6. Remove fixing screws of the head steering
lever front shroud (M4 x12L x2pcs).
S81201-92800~A
7. Remove the head steering lever back shroud.
Service Manual
15