Storage, transport and start of operation
29
4.3.3.4
Hose connections
Female coupling
Male coupling
Bring the couplings together,
fitting the ridges on the male
coupling in the notches on the
female coupling.
Bring the jaw of the female
coupling to the start of the
moulding (male coupling) and
tighten (by hand only).
Arm the lever before start of
operation so that the lock can
engage.
Follow the steps in reverse order to uncouple, making sure that the hose is
empty and at zero pressure.
Caution! Check that the hoses are firmly connected before start of operation.
Instruction Manual PETRO 3003 VOLUTANK Gauging unit BA 140918