Configuration" Tab - BARTEC BENKE A Series Instruction Manual

Operation of the gauging unit
33
5.3.1

"Configuration" tab

Global settings are configured in this tab. They apply to each gauging
process and are saved.
Zoom: The program can be scaled down to as little as 60% so that the
display is correct on monitors with a lower resolution. This change will on-
ly take effect after the program is restarted.
General program settings, such as display language, bright or dark colour
scheme and the root directory for the files generated during the gauging
process, are configured under "Program parameters".
The "Device parameters" relate to the gauging unit hardware. The vol-
ume of the hose connected can be changed here at the IN connection.
The hose volume must be entered using the English notation method
(decimal point instead of comma).
Instruction Manual PETRO 3003 VOLUTANK Gauging unit BA 140918