Subscribe to Our Youtube Channel
Related Manuals for Smarteh LPC-2.ID2V
Summary of Contents for Smarteh LPC-2.ID2V
- Page 1 USER MANUAL Longo programmable controller LPC-2.ID2V RFID Card holder Version 3 SMARTEH d.o.o. / Poljubinj 114 / 5220 Tolmin / Slovenia / Tel.: +386(0) 388 44 00 / e-mail: info@smarteh.si / www.smarteh.si...
- Page 2 Longo programmable controller LPC-2.ID2V Written by SMARTEH d.o.o. Copyright © 2016, SMARTEH d.o.o. User Manual Document Version: 3 November, 2016...
- Page 3 24 months is valid from the date of sale to the end buyer, but not more than 36 months after delivery from Smarteh. In case of claims within warranty time, which are based on material malfunctions the producer offers free replacement. The method of return of malfunctioned module, together with description, can be arranged with our authorized representative.
-
Page 4: Table Of Contents
Longo programmable controller LPC-2.ID2V Longo programmable controller LPC-2.ID2V 1 ABBREVIATIONS................1 2 DESCRIPTION...................2 3 FEATURES..................3 4 OPERATION..................4 4.1 Operational modes..............4 4.2 Parameters................4 5 INSTALLATION..................6 5.1 Connection scheme..............6 5.2 Mounting frame selection............8 5.3 Mounting instructions..............9 5.4 Module labeling...............10 6 TECHNICAL SPECIFICATIONS..............11 7 SPARE PARTS..................12 8 CHANGES ..................13... -
Page 5: Abbreviations
Longo programmable controller LPC-2.ID2V 1 ABBREVIATIONS Sorted by order of appearance in document: RFID Radio frequency identification Light emitting diode... -
Page 6: Description
ID2V module features two PB with which customer is able to activate notification to the personnel. One PB activates “DO NOT DISTURB” message the other PB activates “ROOM SERVICE” request. LPC-2.ID2V module can be modified on customer request: custom front label, push buttons added, LEDs added, housing color. Please contact manufacturer for more information. -
Page 7: Features
Longo programmable controller LPC-2.ID2V 3 FEATURES Figure 1: LPC-2.ID2V Table 1: Features RFID reader RFID card slot Adjustable LED intensity LEDs for showing activated messages & requests: do not disturb, room service 2 PB for activating messages & requests: do not disturb, room service OK “... -
Page 8: Operation
Longo programmable controller LPC-2.ID2V 4 OPERATION LPC-2.ID2V can be in one of two operational modes - normal or error. When LPC-2.ID2V is in normal mode, module parameters can be read or written via Smarteh IDE software. 4.1 Operational modes Normal Communication with the main module is working. - Page 9 Longo programmable controller LPC-2.ID2V 'OK' ID LED [oOkLd]: While this command is active, OK LED1 is set. Type: BOOL → Raw to engineering data: “0” Fault LED1 off → “1” Fault LED1 on 'Room service' LED [oRServ]: While this command is active, room service request LED4 is set.
-
Page 10: Installation
Longo programmable controller LPC-2.ID2V 5 INSTALLATION 5.1 Connection scheme Figure 2: Connection scheme... - Page 11 Longo programmable controller LPC-2.ID2V Table 2: K1 K1.1 Ground K1.2 15 .. 24 V DC Power supply input K1.3 RS-485 A Data receive/send line A K1.4 RS-485 B Data receive/send line B Table 3: LEDs & Buttons ON: RFID key standard OK and ID card LED1: green OK “...
-
Page 12: Mounting Frame Selection
Master ● Frames of other vendors most probably suits as well, but they were not verified by Smarteh. Before installation verify compatibility of non listed frames. Module housing has a fin on each side, which can be easily removed with knife cutter or pliers. This adaptation enables housing to be build in various frame formats. -
Page 13: Mounting Instructions
RFID panel should not be positioned close to conductive areas. Mounting instructions: 1. Set the correct RS-485 address (S1 switch) for LPC-2.ID2V (refer to the Table 4). 2. Connect interconnection cable to the connector K1. Max. allowed tractive force is 30 N. -
Page 14: Module Labeling
Label 2 descriptions: 1. S/N: ID2V-S9-0800000003 is the serial number. ID2V – short product name, • S9 – user code (test procedure, e.g. Smarteh person xxx), • 0800000003 – year and current stack code, • 08 – year (last two cyphers), •... -
Page 15: Technical Specifications
Longo programmable controller LPC-2.ID2V 6 TECHNICAL SPECIFICATIONS Table 6: Technical specifications Power supply from main module Interconnection connector type RJ-12 6/6 Power consumption 1.5 W RFID type EM4100, 125 kHz, Manchester 64, read only Max. reading distance 2 cm Dimensions (W x H x D) -
Page 16: Spare Parts
Longo programmable controller LPC-2.ID2V 7 SPARE PARTS For ordering spare parts following Part Numbers should be used: LPC-2.ID2V RFID card holder, black LPC-2.ID2V P/N: 225ID208V02003 LPC-2.ID2V RFID card holder, white LPC-2.ID2V P/N: 225ID208V01003 Interconnection cable ICM-x P/N: 203ICMxxxxxxxx Splitter SPL-1 (1/2) -
Page 17: Changes
Longo programmable controller LPC-2.ID2V 8 CHANGES The following table describes all the changes to the document. Date Description 17.11.16 General update. 01.07.12 CGP General update . 06.03.09 The initial version, issued as LPC-2.ID2V module User Manual. -
Page 18: Notes
Longo programmable controller LPC-2.ID2V 9 NOTES...
Need help?
Do you have a question about the LPC-2.ID2V and is the answer not in the manual?
Questions and answers