Limited Warranty - Ikelite 4077.67 Product Instruction Manual

4. With your free hand, insert and rotate the 1/4-20 X 5/8" screw
clockwise until threaded into the housing mount. Finish tightening
the base firmly to the housing using a flathead screwdriver. DO
NOT overtighten.
Note: Since the housing base is designed for Ikelite Housings, any
excessive pressure applied to either side of a Non-Ikelite housing
may cause slight rotation or movement of the housing on the base.
Also, make sure the screw does not bottom out on the housing
bottom causing damage. Additional nylon washers should be used
if necessary.

Limited Warranty

This Ikelite product is warranted against any manufacturing defects for
a period of one (1) year from the original date of purchase. To obtain
warranty service, the product must be returned to Ikelite postage paid.
Ikelite will, at its sole discretion, repair or replace such products, and
will return to customer postage paid. All other claims of any nature
are not covered. Except as mentioned above, no other warranty
expressed or implied applies to this Ikelite product.
11