Advertisement
Quick Links
Cable Grip for Housings
Product Number 4080.07
Installation
1. Loosen Screw Pins and remove from Shackles, Diagram A.
2. Line up Shackle Holes with Ball Clamp Holes, Diagram B,
back page.
3. Insert and hand-tighten Screw Pins.
4. Check tightness of Ball Clamps.
Diagram A
Screw Pin
Cable Grip
Shackle
Advertisement
Related Manuals for Ikelite 4080.07
Summary of Contents for Ikelite 4080.07
- Page 1 Cable Grip for Housings Product Number 4080.07 Installation 1. Loosen Screw Pins and remove from Shackles, Diagram A. 2. Line up Shackle Holes with Ball Clamp Holes, Diagram B, back page. 3. Insert and hand-tighten Screw Pins. 4. Check tightness of Ball Clamps.
- Page 2 Diagram B Shackle Holes Ball Clamp Holes IKELITE ikelite.com © 2016 Ikelite Underwater Systems 4080.07-cable-grip-for-housings-1-1116...