Base extension + release handles / base extension (4 pages)
Summary of Contents for Ikelite 4077.67
Page 1
Base with Left Quick Release Handle for DL and FL Housings Product # 4077.67 Base with Dual Quick Release Handles for DL and FL Housings Product # 4077.68...
Important Information The Base with Quick Release Handle(s) is designed primarily » for DL and FL housings, but can be attached to any Ikelite housing using the hardware included. An Anti-rotational Pad is included when attaching the Base to »...
Included in the Box # 4077.01 Left Handle # 4077.02 Right Handle with Extension with Extension (NOT included with # 4077.67) # 0399.02 Spacer # 0399.03 Anti-rotation Pad Base # 4077.66 Qty. 2 - # 0212.16 1/4” Nylon Washer Qty. 4 - # 0245.2 3/8” Nylon Washer Qty.
Attach Base to DL or FL Housing Attach Base to Compact Housing with 3/8-16 Bolts Attach Base to Compact Housing with Threaded Mounts Attach Base to ULTRAcompact Housing with Threaded Mounts Attach Base to Non-Ikelite Housing with 1/4-20 Threaded Mount Limited Warranty Contact Us...
CAUTION: Using the incorrect screws could damage your housing mounts. 2. Once the correct screws have been selected, place your Ikelite DSLR housing upside down on a flat surface or on your lap. 3. Line up the 3/8” tray holes with the housing mounts. If the tray is positioned properly, the Quick Release Buttons will be extending toward the rear of the housing.
Attach Base to Compact Housing with 3/8-16 Bolts 1. Place your Ikelite Compact Housing upside down on a flat surface or on your lap. 2. Peel protective film off # 0399.02 Spacer to expose adhesive. Place Spacer over Housing Mounting Bolts with adhesive side facing up.
12-24 size mount. CAUTION: Using the incorrect screws could damage your housing mounts. 2. Once the correct screws have been selected, place your Ikelite Compact Housing upside down on a flat surface or on your lap. 1/4-20 x 3/8” Screw 1/4”...
12-24 x 1/2” screws. 1/4-20 screws will not thread into a smaller 12-24 size mount. CAUTION: Using the incorrect screws could damage your housing mounts. 2. Once the correct screws have been selected, place your Ikelite ULTRAcompact Housing upside down on a flat surface or on your lap.
Page 9
3. Line up the 3/8” tray holes with the housing mounts. If the Base is positioned properly, the Quick Release Buttons will be extending toward the rear of the housing. 1/4-20 x 3/8” Screw 1/4” Shoulder Washer Quick Release Button 4.
Attach Base to Non-Ikelite Housing with 1/4-20 Threaded Mount Protective Backing (peel off before use) 1. Remove the protective backing from the Anti-rotational Pad. 2. Line up the pad hole with the larger non-threaded center base hole and place the adhesive side down on the base.
(1) year from the original date of purchase. To obtain warranty service, the product must be returned to Ikelite postage paid. Ikelite will, at its sole discretion, repair or replace such products, and will return to customer postage paid. All other claims of any nature are not covered.