Wiring; Ethernet Cable; Introduction; Figure 4-2 Sc/Pc Fiber Connector - Raisecom ISCOM6800 Hardware Description

Raisecom
ISCOM6800 (A)Hardware Description


SC/PC fiber connector
Figure 4-2 shows the appearance of the SC/PC fiber connector.

Figure 4-2 SC/PC fiber connector

When connecting or removing the SC/PC fiber connector, align the connector with the optical
interface, and do not rotate the fiber. Do as below:



4.1.3 Wiring

Table 4-3 lists the wiring of the fiber.

Table 4-3 Wiring of the fiber

relationship
Single-fiber
connection
Dual-fiber
connection

4.2 Ethernet cable

4.2.1 Introduction

The Ethernet cable of the ISCOM6800 can be used to:

To connect the fiber, align the head of the fiber with the optical interface and insert the
fiber into the interface gently.
To remove the fiber, press down the clamping connector, and push the fiber head
inwards, and then pull the fiber out.
To connect the fiber, align the head of the fiber with the optical interface and insert the
fiber into the interface gently.
To remove the fiber, push the fiber head inwards, and then pull the fiber out.
Wiring Local optical interface
Optical interface
Optical interface Tx
Optical interface Rx
Connect the Ethernet electrical interface of the ISCOM6800 to other devices.
Raisecom Proprietary and Confidential
Copyright © Raisecom Technology Co., Ltd.
Direction of Peer optical interface
optical signals
<-> Optical interface
-> Optical interface Rx
<- Optical interface Tx
4 Cables
38