Leds; Technical Specifications; Table 3-25 Leds On The Xep8 Card; Table 3-26 Technical Specifications Of The Xep8 Card - Raisecom ISCOM6800 Hardware Description

Raisecom
ISCOM6800 (A)Hardware Description

3.6.4 LEDs

There are 9 LEDs on the XEP8 card.
Table 3-25 lists LEDS on the XEP8 card.

Table 3-25 LEDs on the XEP8 card

SYS/ALM
LNK1–LNK8

3.6.5 Technical specifications

Table 3-26 lists technical specifications of the XEP8 card.

Table 3-26 Technical specifications of the XEP8 card

Dimensions
Weight
Maximum power consumption
LED Quantity
1
8
Parameter
Raisecom Proprietary and Confidential
Copyright © Raisecom Technology Co., Ltd.
Status
Green System working status LED

Fast blinking green (4 Hz): the system is being
initialized.

Slow blinking green (1 Hz): the system is
working properly.

Off/Green: the system is working improperly.
Red Alarm LED

Red: a fault is generated.

Blinking red: the card is inserted improperly.

Off: no fault is generated.
Orange Standby LED

Orange: the card is in standby status.

Off: the card is not in standby status.
When the card is in standby status, other
LEDs are off.
Green PON interface working LED
 Green: the interface is properly connected and
a successfully-registered ONU is working on
the interface.

Off: the interface is disconnected or no ONU is
successfully registered
392 mm (Width) × 222 mm (Depth) × 22.5 mm (Height)
1.02 kg
88.5 W
Description
Description
3 Cards
22