Raisecom ISCOM6800 Hardware Description page 4

Raisecom
ISCOM6800 (A) Hardware Description
ISCOM6800 (A) Configuration
Guide
ISCOM6800 (A) Installation Guide
Conventions
Symbol conventions
The symbols that may be found in this document are defined as follows.
Name
Symbol
Indicate a hazard with a medium or low level of risk which, if
not avoided, could result in minor or moderate injury.
Indicate a potentially hazardous situation that, if not avoided,
could cause equipment damage, data loss, and performance
degradation, or unexpected results.
Provide additional information to emphasize or supplement
important points of the main text.
Indicate a tip that may help you solve a problem or save time.
Raisecom Proprietary and Confidential
Copyright © Raisecom Technology Co., Ltd.
Description
This document describes services supported by the
ISCOM6800, and introduce configuration methods
and procedures of these services in terms of service
overview, default configurations, configuration
methods, and configuration examples, including
basic configurations, EPON service configurations,
GPON service configurations, multicast service
configurations, VoIP service configurations, CATV
service configurations, TDMoP service
configurations, MAC address table configurations,
VLAN configurations, Spanning Tree
configurations, route configurations, DHCP
configurations, QoS configurations, system security
configurations, link security configurations, and
system management configurations.
This document describes precaution before
installation, installation methods, and verification
after installation, including safety introduction,
installation description, installing the chassis,
installing the fan and the air exhaust plenum,
installing cards, wiring cables, hardware
installation verification, power-on verification,
device initialization, and installation reference.
Description
Preface
ii