Interfaces; Leds; Figure 3-8 Panel Of The Xp2A Card; Table 3-32 Interfaces On The Xp2A Card - Raisecom ISCOM6800 Hardware Description

Raisecom
ISCOM6800 (A)Hardware Description

Figure 3-8 Panel of the XP2A card

3.8.3 Interfaces

There are 2 interfaces on the XP2A card.
Table 3-32 lists interfaces on the XP2A card.

Table 3-32 Interfaces on the XP2A card

Interface
1–2

3.8.4 LEDs

There are 3 LEDs on the XP2A card.
Table 3-33 lists LEDs on the XP2A card.

Table 3-33 LEDs on the XP2A card

SYS/ALM
Type
SFP+ 10GE service optical interface
LED Quantity
1
Raisecom Proprietary and Confidential
Copyright © Raisecom Technology Co., Ltd.
Usage
Status
Green System working status LED
 Fast blinking green (4 Hz): the system is being
initialized.
 Slow blinking green (1 Hz): the system is
working properly.
 Off/Green: the system is working improperly.
Red Alarm LED
 Red: a fault is generated.
 Blinking red: the card is inserted improperly.
 Off: no fault is generated.
Orange Standby LED
 Orange: the card is in standby status.
 Off: the card is not in standby status.
When the card is in standby status, other
LEDs are off.
Description
Available optical modules:

10GBASE-LR/LW

10GBASE-SR/SW
Description
3 Cards
26