Connector; Figure 4-1 Lc/Pc Fiber Connector; Table 4-2 Fiber Connectors - Raisecom ISCOM6800 Hardware Description

Raisecom
ISCOM6800 (A)Hardware Description
Usage
Connect the ISCOM6800 to the
ODF through the PON interface.




4.1.2 Connector

Fiber connectors are different in shape, ferrule end-face, and pigtail sheath color, as shown in
Table 4-2.

Table 4-2 Fiber connectors

LC/PC
SC/PC
LC/PC fiber connector
Figure 4-1 shows the appearance of the LC/PC fiber connector.

Figure 4-1 LC/PC fiber connector

When connecting or removing the LC/PC fiber connector, align the connector with the optical
interface, and do not rotate the fiber. Do as below:
Local connector
SC/PC
SC/PC
SC/PC
Choose the connector type and jumper cable length reasonably based on the on-
site requirements.
The supported connector of the optical interface depends on the optical module.
Choose a connector suitable for the optical interface. Otherwise, it may increase
additional loss of fiber links, reduce transmission quality of services, or even
damage the connector and optical interface.
Connector
Clamping square fiber connector/micro-convex
grinding-and-polishing ferrule end-face
Square fiber connector/ micro-convex grinding-
and-polishing ferrule end-face
Raisecom Proprietary and Confidential
Copyright © Raisecom Technology Co., Ltd.
Remote connector
LC/PC
FC/PC
SC/PC
Description
Type Standard
2 mm SMF
2 mm SMF
2 mm SMF
Pigtail sheath color
Blue
Blue
4 Cables
37